Article Contents:
- What is "wooden meterage" and how it differs from individual items
- Wooden trim and baseboards: profile lineup per meter
- Wooden molding by meter: when it's more cost-effective to buy by meter rather than pre-cut pieces
- Wooden stopper and wooden layout: buying by meter — optimizing purchase
- How the price of trim and wooden baseboard per meter is formed
- Formulas and examples for calculating meterage for a room, door, wall panel
- Typical errors in calculation: allowance, waste, additional elements
- Step-by-step algorithm: from measurements to order and acceptance of linear items
- Conclusion: STAVROS company — wooden meterage with precise calculation and no overpayment
Linear products are items sold not by piece, not by square meter, but by linear meter (meter of length).Wooden trimIncludes dozens of types of items: baseboards, door casings, moldings, rails, layouts, stoppers, battens, moldings, cornices — everything that has a constant cross-section and is sold in pieces of a certain length.Wood TrimDiffers from individual items (door, window, table, chair) in that the buyer determines the required length: orders 50 meters of baseboard, 20 meters of door casings, 100 meters of rails — and on production, the boards are cut to the required length from long-length blanks. Wooden meterage is a trading method where the price is indicated per linear meter (for example, baseboard at 600 rubles per meter), the buyer orders the quantity of meters (85 meters), pays the amount (85 × 600 = 51,000 rubles), receives boards of standard or custom length, which together make up the ordered meterage. Correct meterage calculation is critical: shortage means additional purchase (loss of time, possible difference in tone of a new batch), excess means overpayment (extra material that is not used).Trimming ItemsRequire precise measurements, understanding of calculation formulas, accounting for allowance for trimming and errors.
What is "wooden meterage" and how it differs from individual items
Wooden meterage is a trade term for linear wooden items sold by linear meter. The term "meterage" emphasizes the method of trade: not "give me three baseboards", but "give me 20 meters of baseboard". Linear meter (p.m., m.p.) — a unit of length equal to one meter, regardless of the width, height, or thickness of the item. A 60 mm high baseboard and a 120 mm high baseboard are both measured in linear meters, but the price differs (a taller baseboard contains more wood and costs more). Linear meter differs from square meter (m²), which measures area (length × width): square meters are used to sell boards, panels, sheet materials, where coverage area is important. Linear meters are used for items where area is not critical, and length is important.
Individual items are products sold individually: doors (price per door), windows (price per window), tables, chairs, cabinets. An individual item has fixed dimensions (door 800×2000 mm), fixed price (15,000 rubles per door). A linear item has a fixed cross-section (baseboard 100×18 mm), but length varies: the buyer orders the required length (20 meters, 50 meters, 100 meters), the manufacturer cuts boards from long-length blanks (usually boards 2.2–2.5 meters, cut from blanks 4–6 meters long), packages, and ships. Linear items are more flexible than individual items: you can order the exact number of meters, minimizing waste. But they require calculation: the buyer must calculate how many meters are needed (the manufacturer does not know the buyer's room dimensions).
Advantages of linear products: flexible ordering (exact number of meters), cost savings (pay for what you need, not fixed kits), universality (one baseboard profile fits any room size — just calculate the meterage). Disadvantages: requires calculation (calculation error — shortage or excess), requires installation (boards need to be cut, joined, and fastened — more work than with individual items like ready-made doors).
Advantages of linear materials: flexible ordering (exact meterage), cost savings (pay only for what you need, not fixed kits), universality (one skirting board profile fits any room size — just calculate the meterage). Disadvantages: requires calculation (calculation errors lead to shortages or excess), requires installation (planks must be cut, joined, and secured — more work than with ready-made items like pre-fabricated doors).Buy wooden profiled productsBeneficial for those who can calculate meterage, have a cutting tool (circular saw), and can install (or hire installers). For those who do not want to handle calculations and installation, manufacturers offer ready-made kits (for example, door kit: frame + casings, fixed price per kit).
Wooden trim and baseboards: profile lineup per meter
Wooden trimIncludes items of different purposes, but all are sold by linear meter.Wooden skirting boardsThe most common type of trim, frames the perimeter of the room floor, covers the gap between the floor and the wall.Wooden baseboardHas a profile lineup: from simple (flat board with bevel, height 40–60 mm) to complex (multi-step profile, height 100–150 mm).Wooden baseboard priceDepends on height (the higher, the more expensive — more wood), species (pine is cheaper, oak is more expensive), profile (simple is cheaper, complex is more expensive — more milling operations).
Door casings — the second most popular type of trim, frames the door opening, covers the gap between the frame and the wall. Door casing has a width of usually 60–90 mm, thickness 12–18 mm, profile from flat to decorative. Door casings are sold as kits (5 boards of 2.2 meters for one door — two on each side of the opening, one cut in half for horizontal sections above) or by linear meter (the buyer calculates how many meters are needed for all doors). Kits are more convenient (no need to calculate), but more expensive by 10–15% (the manufacturer includes allowance, packages kits). Linear meterage is cheaper, but requires calculation (one door = 11 meters of casing with allowance for cutting angles).
Moldings — decorative boards for walls, create frames, panels, divide walls into zones. Moldings have a width of 40–100 mm, thickness 10–20 mm, complex profile (multi-step). Moldings are sold only by linear meter (each wall is unique, kits are impossible), price 400–1000 rubles per meter (depends on width, profile, species). Rails — rectangular-section boards for lath walls, partitions. Rails have a cross-section of 20×40 mm, 40×20 mm, 50×25 mm, and others, length 2–3 meters, price 150–600 rubles per meter (depends on cross-section, species). Layouts — thin boards for covering joints, framing panels, width 10–50 mm, thickness 5–15 mm, price 100–500 rubles per meter. Stoppers — small boards for fixing glass, cross-section 8×8 mm, 10×10 mm, 15×15 mm, price 80–300 rubles per meter.
Moldings — decorative wall strips that create frames, panels, and divide walls into zones. Moldings have a width of 40–100 mm, thickness of 10–20 mm, and a complex profile (multi-step). Moldings are sold only by the linear meter (each wall is unique, kits are not possible), price 400–1000 rubles/meter (depends on width, profile, wood species). Racks — rectangular-section strips for lath walls and partitions. Racks have cross-sections of 20×40 mm, 40×20 mm, 50×25 mm, etc., length 2–3 meters, price 150–600 rubles/meter (depends on cross-section, wood species). Filler strips — thin strips for covering joints and framing panels, width 10–50 mm, thickness 5–15 mm, price 100–500 rubles/meter. Stoppers — small strips for fixing glass, cross-sections 8×8 mm, 10×10 mm, 15×15 mm, price 80–300 rubles/meter.
The entire trim lineup is unified by the principle: constant cross-section, variable length, sold by linear meter, price per meter.Pogonаж priceAlways indicated as "per meter" or "rubles per meter". The buyer sees the price (e.g., skirting board 600 rubles/m), calculates the required length (85 meters for an apartment), multiplies (85 × 600 = 51,000 rubles), and gets the order cost. The manufacturer cuts the strips (34 strips at 2.5 meters = 85 meters), packs, and ships. The buyer receives the strips, installs, and cuts to the required length during installation (each strip is cut on-site — joints at corners, door adjacencies).
Our factory also produces:
Wooden molding by the meter: when it is more advantageous to buy by the meter rather than pre-cut pieces
wooden molding by the meter— Profiled strip for making frames (for mirrors, pictures, photographs), for decorative wall panels, for furniture facades. Molding has a complex relief profile (multi-level, with protrusions, recesses, curved transitions), width 30–100 mm, thickness 15–40 mm. Molding is sold in two ways: ready-made frames (manufacturer cuts molding into four strips, bevels corners at 45 degrees, glues into a frame of the required size — frame ready, only insert mirror or picture) and by the meter (buyer orders linear meters of molding, cuts, assembles frame). Ready-made frames are 50–100% more expensive (manufacturer does all the work), but more convenient (no tools, skills required). Meterage is cheaper, but requires: a miter saw with a rotating table (for beveling corners at 45 degrees), a miter gauge or angle guide (for precise angles), clamps (for gluing the frame), and skill (beveling complex-profile corners requires experience).
When it is more advantageous to buy by the meter: non-standard frame sizes (ready-made frames have standard sizes 30×40 cm, 40×50 cm, 50×70 cm; for non-standard size 65×85 cm, no ready-made frame exists, must be made from meterage), large number of frames (if 20 frames are needed for a photo gallery, meterage is cheaper — 50–100% savings per frame, significant in total), presence of tools and skills (for a carpentry workshop, for a designer who often makes frames, meterage is standard). When ready-made frames are more advantageous: single frames (one or two frames for home — the extra cost of 500–1000 rubles for a ready-made frame is offset by time savings), no tools (a miter saw costs 10,000–50,000 rubles, buying one for a single frame is irrational), no skills (incorrectly beveled corners will ruin the molding, requiring a new purchase — the extra cost for a ready-made frame is less than the cost of ruined material).
Calculation of molding meterage for a frame: perimeter of the frame + allowance for cutting corners. Frame size 50×70 cm, perimeter = (50+70)×2 = 240 cm = 2.4 meters. Allowance for cutting: each corner is beveled at 45 degrees, during cutting, the length lost equals the width of the molding (molding width 50 mm — 50 mm lost at each corner). Four corners — 4×50 = 200 mm = 0.2 meters. Total molding meterage = 2.4 + 0.2 = 2.6 meters. With allowance for error (if corner is incorrectly beveled, a spare piece is needed) add 10–15%: 2.6 × 1.15 = 3 meters. Molding is sold in strips 2.5–3 meters long, for this frame one 3-meter strip or two 2-meter strips (1-meter remainder goes to waste).Beadboard can be purchased by the linear meter (hence the name), cut to required sizes for each specific object (a mirror frame 80×120 cm requires perimeter = 4 meters of beadboard, accounting for 45-degree corner cuts).More cost-effective to buy as one long strip (fewer joints, less waste).
Price of molding by the meter: simple profile molding (one or two rounded edges, width 40 mm) from pine 300–500 rubles/m, from beech 500–800 rubles/m, from oak 800–1200 rubles/m. Complex profile molding (four to five levels, width 80 mm) from pine 600–900 rubles/m, from beech 900–1400 rubles/m, from oak 1400–2000 rubles/m. Molding with carving (hand-carved, ornaments) from oak 3000–5000 rubles/m (exclusive segment). For a 50×70 cm frame, meterage 3 meters, medium-profile molding from beech 900 rubles/m, cost = 3 × 900 = 2700 rubles material. Plus labor (if making it yourself — time, if ordering assembly — 500–1000 rubles per frame). Total frame from meterage = 3200–3700 rubles. Ready-made frame of the same size and profile = 5000–7000 rubles. Savings on meterage = 1300–3300 rubles (40–50%).
Get Consultation
Wooden trim and wooden molding purchase by the meter: procurement optimization
wooden trim— Small trim (section 8×8 mm, 10×10 mm, 15×15 mm), used for fixing glass in window, door, and furniture frames.Buy wooden cleatNeed to buy by the meter, as each window or door has its own glazing perimeter. Calculation of trim meterage: glass perimeter × number of glass panes + 10–15% allowance. Door with glass insert 60×40 cm, perimeter = (60+40)×2 = 200 cm = 2 meters. Trim is installed around the perimeter on both sides (front and back of the door), total 2 × 2 = 4 meters. If three doors with glass, meterage = 3 × 4 = 12 meters, with 15% allowance = 13.8 ≈ 14 meters.Oak trimPrice 200–300 rubles/m, cost = 14 × 250 = 3500 rubles.
Trim purchase optimization: trim is sold in strips 2–2.5 meters long. For 14 meters, need 6 strips of 2.5 meters = 15 meters (1-meter remainder — minimal waste). If ordering pre-cut pieces (manufacturer cuts trim to size of each glass pane — 4 pieces per insert), overpayment 30–50% (manufacturer includes time for cutting and packaging by pieces). Meterage is cheaper, but buyer cuts trim on-site (during glass installation, when exact insert size is known). Trim is cut with a simple hacksaw or miter gauge (angles 45 or 90 degrees), no skill required.
Buy wooden trimMolding by the meter — second example of optimization. Molding is used to cover panel joints on walls, to frame panels on furniture facades. Each project is unique (number of panels, sizes of panels vary), so molding is sold only by the meter. Calculation of molding meterage: sum of lengths of all joints or perimeters of all panels + 15–20% allowance. Wall covered with wall paneling, vertical joints between panels are covered with molding. Wall height 2.7 meters, number of joints 15, molding meterage = 15 × 2.7 = 40.5 meters, with 20% allowance = 48.6 ≈ 49 meters. Molding width 25 mm, flat profile, from beech, price 200 rubles/m, cost = 49 × 200 = 9800 rubles.
Optimization of trim procurement: minimize waste (order strips of such length that leftovers are minimal), minimize joints (longer strips result in fewer joints, less work during installation, better appearance), accurately calculate allowance (too small allowance — risk of shortage, too large — overpayment for extra material). For complex projects (many different elements) it is better to prepare a specification (table: element, profile, length, quantity of meters), send to the manufacturer, get optimized calculation (manufacturer will suggest strip lengths that minimize waste).
General principle of optimizing linear material purchase: minimize waste (order strips of length that minimize leftover scraps), minimize joints (longer strips result in fewer joints, less installation work, better appearance), accurately calculate reserve (too small a reserve — risk of shortage, too large — overpayment for excess material). For complex projects (many different elements) it’s better to create a specification (table: element, profile, length, meterage), send it to the manufacturer, and get an optimized calculation (the manufacturer will suggest strip lengths that minimize waste).
How wooden trim pricing and price of wooden skirting board per meter are formed
Pogonаж priceComposed of: cost of wood (species, grade), processing (planing, profiling, sanding), finish (optional: oil, varnish, paint), packaging, delivery.Price of wooden skirting per meterCalculated by the manufacturer based on cost and margin. Cost = sum of expenses to produce one linear meter. Margin = manufacturer's markup (usually 30–50% of cost for wholesale sales, 50–100% for retail).
Wood cost: a finished oak board (for trim production) costs 30,000–50,000 rubles per cubic meter (depends on grade: Grade B is cheaper, Grade A is more expensive, "Extra" is the most expensive). Skirting board section 100×18 mm = 0.1 × 0.018 = 0.0018 m² cross-sectional area. One linear meter of skirting board = 0.0018 m³ wood (if wood density is not considered, calculate by volume). From one cubic meter of oak, you get 1 / 0.0018 = 555 linear meters of skirting board (theoretically). Practically, with waste (defects, offcuts), you get 450–500 meters. Cost of wood per linear meter of skirting board = 40,000 (average price per cubic meter) / 475 (average yield) = 84 rubles. This is the cost of raw material.
Processing: planing (converting a finished board into a smooth blank — 4 sides planed) costs 10–15 rubles/m. Profiling (cutting complex profile with a profiling machine) costs 20–50 rubles/m (depends on profile complexity: simple profile is cheaper, complex profile is more expensive). Sanding (machine sanding for smooth surface) costs 5–10 rubles/m. Total processing = 35–75 rubles/m (average 55 rubles/m). Finish (optional): applying oil or varnish costs 30–50 rubles/m (material + labor). If finish is not ordered, this item is excluded. Packaging: stretch film, cardboard corner protectors cost 3–5 rubles/m. Delivery to warehouse, storage, logistics — another 5–10 rubles/m (overhead costs).
Cost of oak skirting board without finish = 84 (wood) + 55 (processing) + 4 (packaging) + 7 (logistics) = 150 rubles per meter. Manufacturer adds 50% margin (for wholesale sales), wholesale price = 150 × 1.5 = 225 rubles/m. For retail sales, margin is 100%, retail price = 150 × 2 = 300 rubles/m. But the market adjusts: if competitors sell similar skirting board at 280 rubles/m, manufacturer lowers price to 280 (otherwise won't sell). If competition is low, manufacturer may raise price to 350–400 rubles/m (market tolerates). Therefore, realPrice per meter of wooden skirting boardFor oak 300–400 rubles/m (wholesale), 400–600 rubles/m (retail), for beech 200–350 rubles/m (wholesale), 300–500 rubles/m (retail), for pine 120–200 rubles/m (wholesale), 180–300 rubles/m (retail).
Factors increasing price: increased strip length (strips 3 meters cost 10–15% more than 2.5-meter strips — more complex processing, transportation), complex profile (multi-level profile requires more passes of the profiling machine, more time), high grade (Grade "Extra" without knots, defects costs 1.5–2 times more than Grade B), factory finish (painted skirting board costs 30–50% more than unpainted), non-standard section (individual profile, not from catalog, requires equipment setup — minimum order 100 meters, price higher by 20–30%). Factors reducing price: large order volume (from 300–500 meters, wholesale price, discount 20–30%), standard profiles (from manufacturer catalog, no setup required), pine instead of oak (cheaper by 2–3 times), without finish (savings 30–50%).
Formulas and examples of calculating meterage for room, door, wall panel
Formula for calculating skirting board meterage for a room: room perimeter minus door opening width plus 10–15% allowance for trimming. Perimeter of rectangular room = (length + width) × 2. Room 5×4 meters, perimeter = (5+4) × 2 = 18 meters. One door 0.8 meters wide, skirting board not installed in door opening, subtract door width: 18 - 0.8 = 17.2 meters. 15% allowance for trimming (corners cut at 45 degrees, part of length lost, plus possible cutting errors): 17.2 × 1.15 = 19.78 ≈ 20 meters. If skirting board strips 2.5 meters long, need 20 / 2.5 = 8 strips. At price 600 rubles/m, cost = 20 × 600 = 12,000 rubles.
Formula for calculating meterage of door casings: perimeter of door opening on two sides plus 10% allowance for cutting corners. Door opening height 2.1 meters, width 0.8 meters. Casing installed on three sides of opening (two vertical, one horizontal top). Perimeter of three sides = 2.1 + 0.8 + 2.1 = 5 meters. On two sides of opening (room and adjacent room) = 5 × 2 = 10 meters. 10% allowance for cutting = 10 × 1.1 = 11 meters per door. If seven doors, meterage = 7 × 11 = 77 meters, total allowance 10% = 84.7 ≈ 85 meters. At price 600 rubles/m, cost = 85 × 600 = 51,000 rubles.
Formula for calculating meterage of wall rails: wall width divided by module (rail + gap) multiplied by wall height plus 10% allowance. Wall 4 meters wide × 2.7 meters high, rail 40 mm, gap 40 mm, module = 80 mm. Number of modules = 4000 / 80 = 50 modules. Meterage of rails = 50 × 2.7 = 135 meters, with 10% allowance = 148.5 ≈ 150 meters. At price 300 rubles/m (beech), cost = 150 × 300 = 45,000 rubles.
Formula for calculating meterage of molding for wall panel: perimeter of each frame multiplied by number of frames plus 15–20% allowance. Wall decorated with six rectangular frames, each 80×120 cm. Perimeter of one frame = (80+120) × 2 = 400 cm = 4 meters. Six frames = 6 × 4 = 24 meters. 20% allowance (frame corners cut at 45 degrees, many joints — higher chance of error) = 24 × 1.2 = 28.8 ≈ 29 meters. At price 350 rubles/m (oak decorative molding), cost = 29 × 350 = 10,150 rubles.
Formula for calculating meterage of trim for glazing: perimeter of each glass pane multiplied by 2 (trim on both sides) multiplied by number of panes plus 10% allowance. Door with glass 60×40 cm, perimeter = (60+40)×2 = 200 cm = 2 meters. Trim on both sides = 2 × 2 = 4 meters. Three doors = 3 × 4 = 12 meters, with 10% allowance = 13.2 ≈ 14 meters. At price 250 rubles/m (oak trim), cost = 14 × 250 = 3,500 rubles.
Formula for calculating meterage of trim for glazing: perimeter of each glass pane multiplied by 2 (trim on both sides) multiplied by number of panes plus 10% allowance. Door with glass 60×40 cm, perimeter = (60+40)×2 = 200 cm = 2 meters. Trim on both sides = 2 × 2 = 4 meters. Three doors = 3 × 4 = 12 meters, with 10% allowance = 13.2 ≈ 14 meters. At price 250 rubles/m (oak trim), cost = 14 × 250 = 3,500 rubles.
Typical calculation errors: reserve, waste, additional elements
Error 1 — insufficient reserve. The buyer calculates the meterage "just right" without reserve, and during installation, it turns out that the material is insufficient (incorrectly milled angle — the board is ruined, a new one is needed; the wall turned out to be 10 cm longer — one board is missing). Buying a small volume (5-10 meters) may be problematic: the manufacturer does not deliver small volumes (minimum delivery from 50 meters), a new batch may differ in tone (wood from another batch has a different shade). Correct reserve: 10% for simple configurations (rectangular room, straight walls), 15-20% for complex (niches, protrusions, many angles, complex joints). Reserve accounts for: corner cuts (when milled at 45 degrees, length is lost), cutting errors (incorrect measurement, incorrect milling — the board is ruined), minor size deviations (wall planned at 4 meters, actually 4.1 meters).
Error 2 — additional elements not accounted for. Skirting requires corner elements (internal and external angles), end caps (if the skirting ends not in an angle but against a door). The buyer orders skirting, forgets to order angles — during installation, it turns out that angles are needed (joining skirting at 45-degree angles is complex, it's easier to use ready-made corner elements). Buying corners separately — additional delivery, delayed installation. Correct approach: when ordering skirting, order angles immediately (number of internal angles = number of room corners, usually 4; number of external angles = number of protrusions, columns), end caps (number of skirting ends not against angles — usually 2 per door opening).
Error 3 — length of boards not accounted for in calculation. The buyer calculates meterage (50 meters), orders, receives boards of standard length 2.5 meters (20 boards). During installation, it turns out that the wall height is 2.7 meters — boards are 20 cm shorter than the wall, horizontal joints are needed (two boards join vertically — the joint is visible, spoils the look). Correct approach: when ordering, indicate the height/length to be covered without joints, the manufacturer will cut boards to the required length (for a height of 2.7 meters — boards 2.8 meters) or offer standard length that overlaps (for 2.7 meters, 3-meter boards — with reserve, no joints).
Error 4 — difference in tone between batches not accounted for. The buyer orders skirting, receives and installs 80% of the material, it turns out that 10 meters are missing (calculation error). Orders additional 10 meters, receives — tone is lighter by 1-2 shades (new wood batch, different tone). Installed skirting has two tones — looks unprofessional. Correct approach: order all meterage in one batch with a 10-15% reserve, excess 10-15% is cheaper than problems with additional purchase and tone difference. If additional purchase is still needed, notify the manufacturer: "additional purchase for order #12345, tone match required" — the manufacturer will try to cut from the same batch of wood or select a similar tone.
Step-by-step algorithm: from measurements to order and acceptance of linear products
Step 1 — measurements. Measure with a tape measure all lengths to be covered by linear products: room perimeter for skirting, door opening perimeter for moldings, panel joint lengths for wainscoting, wall dimensions for boards. Record measurements in a table: element, length, quantity, meterage. Example: skirting, room perimeter 18 meters minus door 0.8 meters = 17.2 meters, one room, meterage 17.2 meters. Molding, perimeter of opening from both sides 10 meters, 7 doors, meterage 70 meters. Add meterage of all elements of one type (all skirtings, all moldings), get total meterage for each type of linear product.
Step 2 — adding reserve. Add reserve to each meterage: 10-15% for simple configurations, 15-20% for complex. Skirting 17.2 meters + 15% = 19.8 ≈ 20 meters. Moldings 70 meters + 10% = 77 meters. Record meterage with reserve — this is the amount of meters to order. Check if meterage is divisible by board length: if skirting 20 meters, boards 2.5 meters, need 8 boards (8 × 2.5 = 20 meters — perfect). If skirting 19 meters, need 8 boards (20 meters, 1 meter left — acceptable) or 7 boards + one cut (17.5 meters + 1.5 meters = 19 meters, but two boards cut — more waste).
Step 3 — profile, species, finish selection. Open the manufacturer's catalog, select the linear product profile by interior style (classic — complex profiles, modern — simple), by height/width (low ceilings — low skirting 60-80 mm, high — high 100-120 mm). Select species by budget and finish: if transparent finish (texture visible) — beech or oak, if opaque paint (texture hidden) — pine or beech. Select finish: no finish (cheaper, paint on-site), with finish (more expensive, ready for installation). Record selection: skirting profile "Classic-01", height 100 mm, species oak, finish dark oil.
Step 4 — specification preparation. Prepare a table (specification) for ordering: element name, profile (code from manufacturer's catalog), section (height/width), board length (standard 2.5 meters or custom length), meterage, species, finish. Example specification:
|| Element | Profile | Section | Board Length | Meterage | Species | Finish |
| Skirting | Classic-01 | 100×18 mm | 2.5 m | 85 m | Oak | Dark Oil |
|---------|---------|---------|--------------|--------|--------|----------|
| Molding | Modern-05 | 70×16 mm | 2.2 m | 77 m | Oak | Dark Oil |
| Board | Planed | 40×20 mm | 2.7 m | 150 m | Beech | No Finish |
Add additional elements (angles for skirting, end caps), quantity of each element.
Step 5 — cost calculation and order. Send the specification to the manufacturer (by email, through the website), receive cost calculation (price per meter for each element × meterage, total for all elements, delivery cost). Example calculation: skirting 85 m × 700 rub/m = 59,500 rubles, moldings 77 m × 650 rub/m = 50,050 rubles, boards 150 m × 300 rub/m = 45,000 rubles, angles 20 pcs × 200 rub = 4,000, delivery 5,000 rubles, total 163,550 rubles. Agree on cost, production timelines (standard profiles in stock — shipment on order day, non-standard — production 2-4 weeks), delivery method (self-pickup or delivery to site). Pay the order (advance payment 50-100%, depends on agreement with manufacturer).
Step 6 — material acceptance. Upon receiving material, check: number of boards (recount, matches order), meterage (measure several boards with a tape measure, check length), quality (inspect each board — no cracks, chips, warping, moisture), grade (matches order — grade A, B or "Extra"), color and finish (if ordered with finish, check that finish is evenly applied, color matches sample). Prepare acceptance act: if everything is fine — sign, if defects found — record in act, request replacement or discount. Do not accept defective material — problems during installation are more expensive than returns at acceptance stage.
Step 7 — storage and acclimatization. Store material in dry heated space (humidity 40-60%, temperature 18-25°C), horizontally (on flat surface, boards do not touch — spacers between layers), packaged (stretch film protects from dust and moisture). Transfer material to the site (room where installation will occur) 3-5 days before installation, unpack, spread out — wood adapts to room humidity and temperature, dimensions stabilize. Installation after acclimatization will proceed without surprises (gaps calculated correctly, wood won't shrink or swell after installation).
Step 8 — installation and control. Install linear products according to technology (skirting on self-tapping screws or glue, moldings on finish nails, boards on furring strips). Control: levelness (use level, plumb — verticals must be vertical, horizontals horizontal), joint tightness (at corners, junctions joints must be tight, no gaps), uniformity of gaps (if boards have gaps, gaps must be equal along entire length). After installation, visually check: no visible defects (gaps, unevenness, warping), everything matches (skirting with moldings, boards with wainscoting). Final finishing (filling screw heads, sanding, painting or varnishing, if not done at factory) completes the work.
Conclusion: STAVROS company — wooden linear products with precise calculation and no overpayment
— product requiring skill in calculating meterage, understanding of calculation formulas, attention to detail.
Wooden trim, Wood Trim, Trimming Items— correctly means: accurately calculate meterage (without shortage or excess), select species and profile by style and budget, order from manufacturer in one batch (guarantee of tone match), check at acceptance (quality, meterage, grade), store and install correctly (without deformation, accounting for shrinkage).Buy wooden profiled products— all these are linear products, where price is indicated per meter, buyer orders meterage.Pogonаж price, Wooden metering — term denoting all long-form wooden items sold by the linear meter: skirting, casings, moldings, rails, trim, beadboard, stop, timber. "Metering" is a method of measurement and sale, where the unit of measurement is the linear meter (length of plank regardless of its width and thickness). If skirting costs 300 rubles per linear meter, a 2.5-meter plank costs 750 rubles. If trim costs 100 rubles per linear meter, you need 10 meters — cost 1000 rubles. Metering is convenient for long-form items, where each customer buys different quantities for a specific project., wooden molding by the meter, Wooden skirting boards, Wooden baseboardSTAVROS company produces full range of wooden linear products:
, moldings, boards, wainscoting, trim strips, battens, cornices — more than 200 profiles in catalog.Baseboards— transparent pricing, all prices on website, calculator for meterage and cost calculation.Wooden baseboard price, Price of wooden skirting per meter— all in stock at warehouses in St. Petersburg and Moscow.wooden trim, Buy wooden cleat, Oak trim, Buy wooden trim, Door Trim, Floor baseboard wood, Profile made of wood— can be ordered in standard lengths (2-2.5 meters) or custom extended length (3 meters, to order). Species: pine (budget option), beech (balance of price and quality), oak (premium). Processing: planed (basic), sanded (smooth), with finish (oil, varnish, paint). Consultations: STAVROS specialists will help calculate meterage for specific object (room, apartment, house), select profiles from one collection (visual unity), prepare specification, calculate cost. Showrooms in St. Petersburg and Moscow: samples of all profiles, species, finishes, can touch, compare, choose.
Beadboard can be purchased by the linear meter (hence the name), cut to required sizes for each specific object (a mirror frame 80×120 cm requires perimeter = 4 meters of beadboard, accounting for 45-degree corner cuts).STAVROS production: kiln-dried to 8-12%, processed on Weinig (accuracy ±0.3 mm), machine-sanded, quality control. Packaged in stretch film, delivery to St. Petersburg/Moscow/Russia. For wholesalers: prices from 200 linear meters with 20-30% discount, priority delivery. For designers: technical support, 3D visualization of linear products in project, samples for client approval.
STAVROS production: kiln-dried to 8–12%, processed on Weinig (accuracy ±0.3 mm), machine-sanded, quality control. Wrapped in stretch film, delivered to St. Petersburg, Moscow, and across Russia. For wholesalers: prices from 200 linear meters with 20–30% discount, priority delivery. For designers: technical support, 3D visualization of linear materials in the project, samples for client approval.
