Sample of slatted panel OPAN-003

OPAN-003 is a sampleof the PAN-003 slatted panelin three versions: MDF, oak, and beech. Size 200 × 11 × 310 mm — sufficient to evaluate the geometry, relief, and material, convenient for transport and comparison. The surface processing quality corresponds to the Prestige level — the same standard that your full-size panel will receive after the main order.

What is the OPAN-003 slat panel sample

If you think a sample is just a small piece of panel, wait. In practice, it's a completely different story.

The OPAN-003 slat panel sample is created with one specific purpose: to give you the opportunity to make an informed decision before you order a full-sizeslat panel PAN-003. This is not a marketing gesture or a formality — it's a working tool for material selection.

When you hold the OPAN-003 in your hands, you see and feel several parameters at once. The first is the slat pitch: the distance between slats determines the entire visual rhythm of the surface, its density, lightness, or saturation. On a monitor screen, this is difficult to assess. In your hands, it's immediately clear. The second parameter is the depth of the relief and the play of light and shadow. This effect is what makes slat panels so popular: volume arises not from complex decor, but from the alternation of light and shadow between the slats. On the sample, you see this in daylight, directional light, and artificial light. The third is tactility: MDF, oak, and beech feel completely different, and this feeling is important for making the right choice.

The OPAN-003 sample is especially useful if the panel is planned for:

• an accent wall in the living room or bedroom

• a TV area with or without backlighting

• a furniture facade of a cabinet, nightstand, or dresser

• kitchen island or backsplash

• a niche or decorative insert in a partition

• a column or slope

In each of these cases, the cost of a mistake when choosing a material is high. The sample allows you to eliminate this uncertainty before the main order is placed.

It is important to understand: OPAN-003 preserves the geometry and proportionsof the full-size panel PAN-003exactly. This is not a simplified version, not a production waste, and not a demonstration stand. It is the same product, the same Prestige standard, the same finish — only in a convenient format for evaluation and approval.

Size 200 × 11 × 310 mm: why this is enough for selection

The question about the sample size is one of the most practical. Clients often wonder: is it too small? Will 200 × 310 mm be enough to truly understand how a large surface will look?

Answer: yes, it is enough — and here is why.

The format 200 × 11 × 310 mm was not chosen by chance. It allows you to see several full slat modules with inter-slat gaps — enough for the eye to perceive the rhythm and evaluate the pattern density. At the same time, the sample is narrow enough to be easily applied to a wall, furniture surface, or finishing material samples.

What exactly does this format provide:

• Comparison with paint and enamel samples. You apply OPAN-003 from MDF to your color samples and immediately see how the panel will take on the desired shade. No photograph can replace this moment.

• Checking compatibility with flooring, veneer, and cladding. An oak or beech panel sample can be easily compared with parquet, veneered facade, or natural stone samples.

• Evaluation under different lighting. Daylight, directed spot light, diffuse scattered light — the sample will behave differently under each. And this needs to be checked before ordering the main volume.

• Comparison of three materials simultaneously. If you order all three options — MDF, oak, and beech — you hold them side by side and see the difference right at your site, under real lighting conditions.

• Convenient transportation for designers and furniture makers. The sample fits into a work bag, sample folder, or briefcase. It is easy to carry to the site, show to the client, and coordinate with the team.

The OPAN-003 format corresponds to the standard that has already proven itself well in the STAVROS sample series. A similar logic is implemented in theslat panel sample OPAN-001, which is also used for preliminary selection before ordering the main panel from the corresponding series.

OPAN-003 materials: what to choose for your project

One of the main advantages of OPAN-003 is the ability to evaluate three completely different materials in the same geometry. This is especially valuable when you haven't yet decided on a solution: MDF is cheaper and more predictable, oak is lively and prestigious, beech is neutral and neat. The difference between them is not only in price: they represent different aesthetics, different application scenarios, and different requirements for finishing.

OPAN-003 made of MDF

MDF is the choice for those who work with color. If your interior is built on precise shades, if the panel should seamlessly fit into the color scheme — and no living wood texture should be present — MDF handles this task better than any solid wood.

The OPAN-003 sample made of MDF allows you to evaluate:

• smoothness and uniformity of the surface for painting with enamel

• absence of knots, fibers, and natural irregularities

• predictability of the final shade when applying any colorant

• Prestige level sanding quality: the surface is ready for painting without additional preparation

The MDF version is especially in demand whenMDF slatted panels for paintingare used in design projects with a strict color concept: monochrome interiors, two-color solutions, accent walls in a specific color. In such projects, a sample is especially needed — not to evaluate the texture, but to check how the desired color will lay on the surface of that particular geometry.

Also, MDF is the optimal choice forfurniture facades made of slatted panels, where stability of geometry and predictability of material behavior when applying paint coatings are important. A cabinet, TV stand, chest of drawers, kitchen island — in these products, the MDF slatted panel works flawlessly if the painting is done well.

OPAN-003 made of oak

Oak is a completely different story. It is a material with character, history, and living fiber. When you pick up a sample of OPAN-003 made of oak, you immediately feel the difference: a dense, hard, slightly rough surface with a pronounced texture pattern. No imitation can reproduce this.

An oak sample is needed in the following situations:

• when the interior is built on natural materials and living wood texture

• when the panel is planned for oil, wax coating, or tinting while preserving the fiber pattern

• when a prestigious, warm, organic character of the surface is important

• when the panel should be combined with natural parquet, wooden furniture, veneered facades

• when the project involves a pronounced wooden aesthetic — from Scandinavian minimalism to modern classics

On the OPAN-003 sample made of oak, you will appreciate exactly what cannot be conveyed on a screen: the living grain pattern, the warmth of the surface, the material's response to light. Oak under directional lighting provides a rich play of light and shadow in the slats — depth and volume that look expensive even in a simple interior.

form the architecture of walls and ceilings, creating a play of light and shadow.in combination with an oak slatted panel create a cohesive wooden finishing system. It is for such solutions that the oak sample allows you to check in advance how the geometry of PAN-003 will fit into the wooden context of your project.

OPAN-003 made of beech

Beech occupies a separate niche: it is natural solid wood, but with a calmer, more even, and neutral character of the pattern compared to oak. The beech surface does not shout about itself — it creates a soft, delicate wooden background that fits well into a variety of interior concepts.

The OPAN-003 sample made of beech is especially relevant when:

• natural wood is needed, but without too active and pronounced texture

• the interior suggests a light, airy atmosphere with wooden accents

• a neat, even surface is required under clear varnish, oil, or light tinting

• a neutral woody character is important, one that does not dominate but complements

• the project combines wood with metal, glass, white stone, or light fabric

Beech is a less prestigious material than oak, but it is its neutrality that makes it a universal solution. With the sample, you can compare the beech surface with oak and MDF options, and immediately understand which of the three surface languages your project needs.

Slat panel for walls and furnituremade of beech is a practical solution for residential interiors where a wooden accent is desirable but should not overpower everything else. Bedroom, home office, children's room, hallway — in these spaces, a beech slat panel often works better than an oak one precisely because of its restraint.

Why order a sample before the main PAN-003 panel

This question may seem obvious, but in practice, this is where many clients lose money, time, and nerves. Ordering slat panels without a preliminary sample means making a decision blindly.

Let's break down specifically what you get when you order OPAN-003 before the main volume.

You choose the material without error. MDF, oak, beech — on screen they look similar. In hand, they are completely different. The OPAN-003 sample allows you to feel the difference physically, rather than guessing from a photo.

You check the combination with other interior materials. The sample is applied to samples of paint, parquet, tile, veneer, wallpaper. You see the combination in real conditions — under the lighting that will be at your site.

You coordinate the choice with the designer or client. It is easier for the designer to defend the solution to the client when there is a physical sample. The client sees what they are buying and makes a decision more confidently.

You verify the quality of the Prestige finish. The OPAN-003 sample shows exactly the processing standard that the finished batch will receive. No surprises: you see the final surface quality before the main volume is shipped.

You speed up the purchasing decision. The sample removes uncertainty and shortens the approval cycle. This is especially important for designers and specifiers working under tight deadlines.

You reduce the risk of a costly mistake. The cost of a sample is minimal. The cost of a full volume of slatted panels for a wall, TV zone, or set of furniture fronts is a completely different order of magnitude. A sample is insurance against a material error.

The "sample → main panel" mechanism is already implemented in the STAVROS series: on the page of the PAN-003 slatted panelright in the FAQ section, there is a question about ordering a sample before purchase. This is not accidental: practice shows that clients who order a sample before the main batch return goods less often, ask fewer questions about quality, and make repeat purchase decisions faster.

Where is the PAN-003 geometry used?

The OPAN-003 sample accurately conveys the geometry of the main PAN-003 panelTherefore, by evaluating the sample, you simultaneously evaluate how the finished solution will look in each of the key application scenarios.

Accent walls in the living room and hall. The PAN-003 slatted panel on the accent wall is relief, rhythm, and depth. The sample allows you to check how this rhythm is perceived in the scale of your space under real lighting.

TV zones. One of the most popular uses of slatted panels is a niche or wall behind the TV. The sample helps to understand whether backlighting behind the slats is needed here and how it will look with the chosen material. The combination of slatted panels with backlighting is described in detail in the article.Slatted panels with lighting.

Bedrooms and headboards. A slatted wall behind the bed headboard is one of the trendy scenarios where the softness and warmth of the material are important. A sample of beech or oak allows you to check how the natural texture works in a living space.

Furniture facades. Cabinets, nightstands, dressers, built-in furniture facades — all these are scenarios where a slatted panel turns ordinary furniture into a designer object. How to choose the right solution for a cabinet and nightstand is covered in the article.slatted panels for furniture fronts.

Kitchen islands. Slatted finishing of a kitchen island is a combination of functionality and distinct character. How to choose the material and rhythm for a kitchen island is in the article.Slatted panels for the kitchen island.

Niches, columns, decorative inserts. In these cases, the sample is indispensable: a small fragment allows you to check how the PAN-003 geometry looks in a confined space or as a local accent.

Commercial interiors. Offices, restaurants, hotels, showrooms — in the commercial segment, the OPAN-003 sample performs another important function: approval with the client. No render can replace a physical sample during approval.

What you check with the sample

This is perhaps the most practical section of the card. Let's be specific: what exactly are you evaluating when holding OPAN-003 in your hands?

Slat spacing. The distance between the slats determines the visual density of the pattern. On the sample, you see this rhythm in full size — not in pixels on the screen, but in millimeters in your hands.

The depth of the relief. How much do the slats protrude above the base? How pronounced is the shadow in the grooves? This is what creates the feeling of volume and luxury of the surface — and this needs to be seen in person.

The play of light and shadow. The same sample looks completely different under directional side light and under diffused lighting. On the sample, you check both options in the conditions of your specific object.

The shade and color of the material. MDF is neutral, gray-beige tone without texture. Oak is warm, golden-brown, with pronounced fibers. Beech is light, creamy-pinkish, with a uniform fine-grained pattern. On screen, these differences are smoothed out; on the sample, they are obvious.

The quality of sanding. The Prestige level is a specific tactile standard. The surface should be uniform, without tool marks, without burrs, without unevenness. On the sample, you check this with your hands.

The ease of combining with other interior materials. The sample is applied to moldings, baseboards, paint samples, veneer, parquet — and you see the system as a whole, not a separate element.

The surface's reaction to finishing. If you plan to paint an MDF panel, apply oil to oak, or varnish beech — the sample allows you to do a test application on a small area and verify the result before the main order.

Installation and finishing

The OPAN-003 sample is used not only for evaluating the material but also as a working tool when planning installation and finishing. This is a practice well known to professional builders and designers.

Test painting. If you are working with an MDF panel, apply the desired color to the sample — and you will see the exact final color taking into account the relief of the slats and the depth of the grooves. This is especially important when working with dark, saturated, or complex shades, where the behavior of paint on a textured surface may differ from a flat one.

Tinting and oil for oak and beech. If you plan an oil or wax finish for a natural panel, the sample allows you to check how a specific composition applies to this surface and what shade it gives. Oak and beech absorb oil differently — and this is worth checking in advance.

Checking compatibility with lighting. If the project includes LED lighting behind the slats or under the panel, the sample allows you to check how the light distributes in the grooves, what effect warm or cold light gives on the chosen material.

Joint with moldings and baseboards. STAVROS slat panels are installed in a system with moldings, baseboards, and decorative slats. You can apply the sample tothe interior slat RK-002or elements from the sectionmolding productsand check how they align in height and thickness.

The installation of rigid slat panels is simple: the surface must be smooth and sturdy, fastening is done with glue and/or clips depending on the base. The sample helps to assess in advance how the panel will fit the specific surface of your project.

What to combine OPAN-003 with in the interior

The slat panel PAN-003 is a system element. It never exists in the interior on its own: there are always moldings, baseboards, slats, and other panels nearby. And the OPAN-003 sample is the perfect moment to check the entire system as a whole.

Moldings and cornices. The top end of the slat panel is traditionally covered with a molding. The STAVROS range includesTrimming Itemswhich perfectly match the PAN-003 series in thickness, material, and finish. The OPAN-003 sample helps to choose the right molding before installation.

Baseboards. The bottom end of the panel is covered with a baseboard. Here, matching in material and finish is important — especially if the panel is made of natural oak or beech. Compare the sample with options from the sectionwooden trim.

Decorative slats. In system solutions, slatted panels are often complemented with individual decorative slats around the perimeter or as dividers.Interior Rail RK-002 — one of these elements, which can be easily checked next to the OPAN-003 sample.

Adjacent panels of the series. If you are designing a finish from several modules or comparing multiple geometries, next to OPAN-003 it is appropriate to consider:

• slatted panel PAN-001 with a different slat spacing

• primed MDF panel PAN-002 — ready for painting without additional treatment

• primed MDF panel PAN-004 — for comparing geometries and slat proportions

The entire catalog of slatted panels is presented in the section STAVROS slatted panels.

Who needs an OPAN-003 sample

This is a question worth asking yourself right now. And if you're reading this page, the answer is probably already obvious.

A private client who is renovating and wants a predictable result. You've invested in a design project, chosen materials, and the last thing you need is a surprise when receiving the panels. A sample eliminates this risk.

An interior designer working on multiple projects simultaneously. A physical sample is a coordination tool: you bring it to a client meeting, place it next to other materials, and close the selection question in one session.

An architect or designer who includes slatted panels in a project specification. The OPAN-003 sample is a way to ensure the chosen material and geometry match the design concept before final approval.

A furniture maker who uses slatted panels in facade production. The sample is used to check the compatibility of the PAN-003 geometry with the facade structure, base thickness, and mounting type.

A procurement specialist or site foreman who prepares material orders. The sample allows precise determination of material and quantity without unnecessary approvals.

A finishing studio or construction company that works with slatted panels in volume. Having samples on hand is a professional standard.

Useful before ordering

Before placing an order for the main panelPAN-003we recommend reviewing materials that will help you make a decision on material, application, and finish:

• slatted panels for furniture fronts — how to choose a solution for a wardrobe, cabinet, and kitchen island

• Slatted panels for the kitchen island — material, rhythm, and finish

• Painted MDF plank panels — how to choose a solution to match the interior color

• Slatted panels with lighting — how to achieve an expensive volume without a complex structure

• form the architecture of walls and ceilings, creating a play of light and shadow. — how to choose slats for walls, furniture, and interiors

• Slat panel for walls and furniture — how to choose material and format

FAQ: answers to questions about the OPAN-003 sample

Can I order the OPAN-003 sample before the main batch?

Yes, that is exactly what it is designed for. OPAN-003 is a sample of the PAN-003 slatted panel, specifically intended for preliminary material selection and geometry evaluation. Ordering a sample before the main volume is standard practice at STAVROS: it reduces the risk of material selection errors and speeds up the final purchasing decision.

How does the OPAN-003 sample differ from the main PAN-003 panel?

Only in size. The sample has dimensions of 200 × 11 × 310 mm and is intended for evaluation, not for surface mounting. The geometry of the slats, pitch, relief depth, material, and sanding quality are all fully consistent withthe main PAN-003 panel.

Which material should I choose: MDF, oak, or beech?

It depends on the task. MDF is for painting, for precise color, for furniture facades when a uniform surface is important. Oak is for natural texture, under oil or tinting, for an expensive, living interior. Beech is for a calm wood grain, a neutral natural surface. We recommend ordering all three sample options and comparing them in person in your space.

Is the sample suitable for color matching?

Yes, very much so. The MDF sample OPAN-003 can be used for trial application of enamel or paint — this allows you to accurately check how the desired color will lay on the textured slatted surface. For oak and beech samples, you can similarly test oil, varnish, or tinting.

Can a designer or furniture maker use the sample?

Absolutely. The OPAN-003 sample is specifically designed for use in a professional workflow: it is convenient to carry to the site, show to the client, compare with other material samples, and coordinate with the designer. The 200 × 310 mm format fits into a sample folder.

How quickly is the sample shipped?

Образцы OPAN-003 отгружаются в сжатые сроки — значительно быстрее, чем основная партия. Уточнить наличие и сроки отгрузки конкретного материала рекомендуем напрямую у менеджера STAVROS. Доставка возможна по Санкт-Петербургу, Москве и в другие регионы России.

Можно ли после образца заказать основную панель PAN-003 в том же материале?

Да, именно так это и работает. После оценки образца и выбора материала вы переходите к заказу полноразмерной реечной панели PAN-003 в том же материале и с тем же качеством обработки. Никакого разрыва между образцом и основной партией нет: это один и тот же производственный стандарт.

Какие ещё модели посмотреть для сравнения?

Для полного сравнения геометрий и материалов рекомендуем обратить внимание на весь раздел STAVROS slatted panels. В частности: PAN-001 — иной шаг реек, PAN-002andPAN-004 — грунтованные МДФ-панели. Для сравнения декоративных реек — RK-002.

How to order a sample from another city — from Moscow or another region?

STAVROS works with clients across Russia. The OPAN-003 sample can be ordered with delivery to Moscow, St. Petersburg, and any other region. You can place an order for a slatted panel sample, clarify delivery costs and timelines via the order form on the website or by phone with a manager.