Slat panel PAN-005

Slat panel PAN-005 is not a flat cladding or a regular board: it is a decorative relief panel with a frequent vertical slat pattern that creates an expressive 3D texture on the surface. The relief with a profile depth of 9 mm forms a rhythmic vertical pattern visible in any lighting, and the panel width of 1010 mm allows quickly covering a large area with minimal joints. PAN-005 is available in MDF, beech, and oak, is designed for finishing, and is suitable for both residential and commercial interiors.

The main purpose of PAN-005 is to quickly create an expressive vertical texture: decorate an accent wall, column, reception desk, furniture facade, or curved decorative surface without complex installation and additional molding compositions.

Where PAN-005 is used

Slatted decorative panel PAN-005 covers a wide range of furniture and interior tasks — from living rooms to commercial spaces.

Accent walls in residential interiors — TV zones, walls behind a sofa or bed, hallways and foyers. The vertical relief of PAN-005 creates a full decorative background without plastering techniques, patterned wallpaper or additional finishing: the panel itself is the decor.

Columns, half-columns and radius walls — one of the key features of PAN-005. The thin 9 mm profile and slatted panel design allow use on curved surfaces: columns in living rooms and halls, rounded walls, radius stands and architectural niches. Before installation on a radius, it is necessary to check the base, the permissible bending radius and the fastening method, taking into account the specific panel material.

Reception desks and bar counters — decorative slatted wood panel for cladding the front surfaces of receptions, bars and administrative areas. The vertical relief on the counter facade gives the commercial space materiality and natural warmth.

Furniture facades, cabinets, chests, consoles — PAN-005 as a cladding material for furniture surfaces: cabinet fronts, chest sides, front panels of consoles and built-in furniture. The slatted relief turns an ordinary flat facade into an architecturally expressive element.

Partitions and zoning structures — solid wood decorative panels For finishing partitions in residential and commercial spaces, when the partition should not only separate zones but also become a decorative accent.

Commercial interiors — cafes, restaurants, offices, showrooms, beauty salons, hotels, and any spaces where natural material and expressive texture are part of branding or design concept.

The panel can be used as an interior accent, furniture cladding, or decorative finish for straight and complex-shaped surfaces — the function is determined by the project's task.

Size 1010 mm and profile 9 mm: practical value

Panel width A = 1010 mm is one of the key working parameters of PAN-005. On a standard wall with a height of 2700–3000 mm, three to four panels with a width of 1010 mm cover the entire plane horizontally with a minimum number of vertical joints. The wide format reduces installation time, simplifies layout, and decreases the visibility of seams in the finished coating.

Relief depth C = 9 mm is a working balance between visual expressiveness and practicality. 9 mm create a well-readable light-shadow play: each slat receives an illuminated front plane and a shaded side, making the relief visible under any type of lighting — both spot and diffused. At the same time, 9 mm is not a massive volumetric decor, but a neat profile that does not 'absorb' space or weigh down narrow rooms.

The frequent spacing of slats creates a dense, uniform rhythm on the surface. This distinguishes PAN-005 from panels with rare wide slats: the dense pattern is perceived as a single texture, not as a set of individual elements. The surface looks textured and material, but remains calm and does not overload the interior with excessive detailing.

The panel length depends on the material and the chosen version: MDF is supplied in lengths of 950 mm and 2670 mm, beech and oak — in lengths of 950 mm and 2400 mm. Before ordering, it is necessary to check the required length against the room height or furniture element size and calculate the layout scheme considering joints, trimming, and transitions to the ceiling, floor, and corners.

Frequent vertical relief as an interior accent

The vertical rhythm of PAN-005 slats works on several levels of perception. Visually, vertical lines stretch the surface upward: even at a standard height of 2700 mm, a wall with a slatted panel appears higher than it actually is. This is especially valuable in small spaces where you need to create a sense of spaciousness and air without complex architectural changes.

The play of light and shadow is a natural property of the PAN-005 relief pattern. With side or spot lighting, each slat casts its own shadow: the surface lives and changes throughout the day depending on the direction and intensity of light. This makes a wall or furniture facade with PAN-005 a dynamic element of the interior — it looks different in the morning and evening, under artificial and natural light.

The frequent vertical relief of PAN-005 helps create a calm yet expressive background: the surface looks architectural, adds depth to the interior, and emphasizes the natural texture of the material. The panel works as a standalone decor without additional moldings, stucco cornices, or complex wall compositions.

Materials: MDF, beech, and oak

Slat panel PAN-005 is produced in three materials. The choice between them is entirely determined by the finish, operating conditions, and visual concept of the project.

MDF: a stable base for painted interiors

MDF is a homogeneous material without natural texture, providing a predictable, even result under any coating. MDF slatted panel — the optimal choice for projects where the surface needs to be painted in an exact color: to match the wall color, furniture, or the branded interior of a cafe or office.

For MDF, an additional version is available — Prestige primed. The primed panel is supplied with a base primer layer applied, which speeds up final painting on site: no separate priming operation is required before applying enamel. This reduces labor costs during finishing work and minimizes the risk of uneven paint absorption on the relief edges of the slats.

On relief surfaces with complex profiles — and PAN-005 is exactly that — even paint application requires careful work with a brush or spray in the corners of the slats. The primed version makes this process more manageable: the base is already sealed, and the final coat lays more evenly.

Beech: natural solid wood for painting and glazing

Slatted panel made of beech — a choice for projects where a natural wood base is important, but the texture should remain calm and neutral. Beech takes enamel and glazing coatings well: under dense paint, its surface behaves predictably; under light tinting, it provides a warm neutral background without a pronounced grain pattern.

Beech is a natural choice for mixed interiors where a slatted panel is joined with other wooden elements of the same species: moldings, trims, frame parts, or wooden elements for furniture.

Oak: expressive texture for tinting and oil

oak slat panel — a solution for projects where the natural wood grain is a key decorative element. On the slatted surface of oak, the texture reveals itself especially expressively: the fibers run along each slat, the species' "mirrors" create a characteristic graphic pattern, unique to each panel fragment.

Under tinting, the oak panel acquires a deep color with internal contrast: dark pores and light fibers do not merge into a uniform tone but create a lively, rich pattern. On large relief surfaces—accent walls, columns, facades—the oak slatted panel looks particularly impressive. Under oil or clear varnish, oak retains its natural warmth and matte finish, which is valued in Japandi, eco, and modern neoclassical interiors.

MDF and beech are more often chosen for painting, while oak is for projects with an open natural wood texture.

Which styles PAN-005 suits

The vertical relief of PAN-005 is versatile in its stylistic range. Under enamel in white or neutral colors, the panel reads in the spirit of modern minimalism and Scandinavian style: clean geometric texture without color accents. Under dark tinting or aged oil on oak, the panel takes on the character of Japandi or loft: materiality, natural warmth, a "living" surface.

Modern interior and minimalism — vertical rhythm as the only decorative technique on an accent wall. Clean lines, no unnecessary elements, all expressiveness through texture and light.

Japandi and eco-style — oak PAN-005 with oil or clear varnish as an embodiment of natural material without additional processing. Natural wood grain, warm tones, organic texture.

Scandinavian style and contemporary — panel with light enamel or neutral tinting. Expressive texture against white or light gray walls.

Commercial interiors: cafes, restaurants, showrooms, hotels — wooden 3D panel for interior as a branding element. PAN-005 creates a premium feel of natural material at a relatively affordable cost per square meter of finishing.

Neoclassicism in a modern interpretation — slat panel instead of traditional molding compositions as a more concise, "cleaned" version of classic paneling.

"Prestige" sanding quality: important for textured surfaces

On a slat panel with frequent slat spacing, the sanding quality is evident on every square centimeter of the visible surface. Unlike a flat panel, here each slat has several planes: the front face, sides, and the base between slats — and all of them are visible under oblique lighting and when applying the final coating.

Uneven sanding on a textured surface means: different levels of gloss on the same plane after painting, visible processing marks on the sides of slats when tinting, uneven absorption of oil or varnish on areas with different final processing grit.

The "Prestige" quality for PAN-005 includes sequential sanding of all working surfaces of the relief to a final grit value: the front planes of the slats, the sides of the bevels, and the bottom of the inter-slat grooves. The panel is supplied ready for primer and topcoat application. In the primed version, MDF additionally provides a smooth base surface for subsequent painting on site without the need for a primary priming operation.

How to choose PAN-005 for a project

Step 1 — determine the surface. A straight wall, column, curved section, furniture facade, partition, or counter — each type of surface has its own requirements for installation and material selection. For curved sections, check the base and the permissible fastening method in advance, taking into account the panel material.

Step 2 — choose the material. MDF for enamel and painting, beech for enamel or glazing, oak for tinting, oil, or clear varnish. For commercial interiors with high surface load, consider additional finish options with protective properties.

Step 3 — calculate the layout scheme. The panel width of 1010 mm simplifies the calculation: divide the wall width by 1010 mm, taking joints into account. Plan the location of vertical joints on the wall — ideally, they should fall in less noticeable areas or be hidden by a corner, furniture, or decorative element.

Step 4 — check the panel length against the room height. MDF 2670 mm covers the standard height of 2700 mm with minimal trimming. Beech and oak 2400 mm are suitable for rooms with a height of up to 2400 mm. For taller rooms with solid wood, a horizontal joint with a well-thought-out location will be required.

Step 5 — account for trimming allowance. For straight walls — 5–7% of the calculated area. For surfaces with niches, protrusions, columns, and curved sections — 10–15%.

Step 6 — plan the transitions. The joint with the ceiling, baseboard, and corners should be planned before installation: for PAN-005, it is recommended to use Wooden moldings or appropriate profile strips for neat edge finishing.

Who is PAN-005 suitable for

Interior designers and architects — PAN-005 is included in the specification by article for residential and commercial projects. The wide format of 1010 mm simplifies area calculation and reduces the number of items in the estimate.

Furniture workshops and joinery production — decorative relief wood panel for cladding furniture facades, side panels, and partitions. Supplied ready for installation, requires no additional mechanical processing of the profile.

Finishing companies — material for decorative wall finishing in residential and commercial projects. The primed MDF version speeds up painting work on site.

Owners and managers of commercial spaces — cafes, restaurants, beauty salons, showrooms, hotels, and offices, where PAN-005 is used as an element of corporate identity or decorative finishing of areas requiring natural texture.

Masters of wall panels — PAN-005 as a working material for creating slatted decorative walls, columns, and partitions turnkey.

Private customers — each item is available for retail from one unit for independent design of accent walls, TV zones, hallways, and other decorative elements according to your own project.

PAN-005 is chosen for projects where an expressive vertical texture, natural material, and the ability to design not only a flat wall but also a curved surface or furniture element are needed. Related range: Carved wooden decoration, wooden elements for furniture и wooden interior decor.

PAN-005 — the essentials in brief

Slat panel PAN-005 — a decorative relief panel with frequent vertical slats for walls, furniture, columns, curved surfaces, and interior finishing. It helps create an expressive 3D texture, add depth to the interior, and design an accent area without complex decor or additional molding compositions.

The panel has a width of 1010 mm and a relief depth of 9 mm. The frequent vertical rhythm visually elongates the surface, creates a play of light and shadow, and is well-suited for modern residential and commercial interiors: TV zones, walls behind a sofa or bed, reception areas, bar counters, furniture facades, partitions, and columns.

PAN-005 is available in MDF, beech, and oak. MDF and beech are convenient to choose for enamel and painting, while oak is for tinting, varnish, or oil when it is important to preserve the natural wood texture. Before ordering, it is recommended to verify the material, panel length, layout scheme, and installation features on the chosen surface.

FAQ about slat panel PAN-005

What is the slat panel PAN-005 used for?
PAN-005 is used for decorative finishing of walls, columns, curved surfaces, furniture facades, partitions, reception counters, and interior accent zones. The panel creates an expressive vertical texture with a 3D relief effect.

Is PAN-005 suitable for curved surfaces?
By design and profile, the panel is suitable for finishing curved sections — columns, rounded walls, and posts. Before installation, it is necessary to check the base, the permissible bending radius for the selected material, and the fastening method, taking into account the project requirements.

Can PAN-005 be used for furniture?
Yes, the panel is used for furniture facades, cabinets, wardrobes, consoles, bar counters, and other decorative furniture elements. The slatted relief turns a flat facade into an architecturally expressive detail.

What is a primed MDF finish?
Primed MDF slatted panel is supplied with a base primer layer applied, ready for final painting. This speeds up finishing work on site and ensures a more even application of the topcoat on the relief edges of the slats.

What to choose — MDF, beech, or oak?
MDF and beech are more often chosen for enamel and painting in a solid color. Oak is suitable for tinting, varnish, or oil when it is important to preserve the natural texture and wood grain. Oak looks especially impressive on large relief surfaces with side lighting.

Is the panel suitable for commercial interiors?
Yes, PAN-005 is well suited for cafes, restaurants, offices, showrooms, beauty salons, hotels, and reception areas where an expressive natural texture is needed to create a premium atmosphere in the space.