Polyurethane Molding: Price, Photos, and Full 2026 Catalog

How much does beauty cost? A question that concerns everyone who dreams of a classic interior with exquisite moldings. In 2026Polyurethane molding pricewhich became accessible to a wide audience, ceased to be a privilege of luxurious mansions. Modern production technologies, logistics optimization, and market competition have made architectural decor a reality for ordinary apartments and houses. But how not to get lost in a sea of offers? How to choose quality products at a reasonable price? How to understand what exactly you are buying when looking at photos in a catalog?

This article is a detailed guide to pricing and visual selection of polyurethane moldings. We will break down what makes up the cost of each element, why seemingly identical cornices can differ in price by three times, what they showphotos of polyurethane moldingsand how to learn to read catalogs. Armed with this knowledge, you can make an informed choice, avoiding overpayments and disappointments.

Go to Catalog

Pricing Structure: What Affects the Cost

Size Matters

Element dimensions are the first and obvious pricing factor. A linear meter of narrow molding 3-4 cm wide costs 150-300 rubles. A wide cornice 12-15 cm will cost 800-1500 rubles per meter. A large ceiling rosette with a diameter of 80-100 cm can cost 8000-15000 rubles, while a compact one of 30-40 cm is only 1500-3000 rubles.

Why is the difference so significant? Material consumption is proportional to the volume of the product. A large element requires more polyurethane raw material, which is not cheap in itself. The mold for a large product is more complex to manufacture and more expensive to produce. Logistics also plays a role - transportation and storage of large-sized elements cost more.

The length of linear elements is standardized - usually 200 cm or 240 cm. The price is indicated either per linear meter or per piece (strip). When calculating the budget, it is important to clarify this point.Polyurethane moldings priceper meter may seem attractive, but if the strip is 2.4 meters, multiply by 2.4 to get the unit cost.

Profile thickness affects not only material consumption but also visual effect. Thick molding creates deep relief and expressive chiaroscuro. Thin molding works more delicately and is suitable for small spaces. However, a thin element requires a higher quality mold to preserve the clarity of small details, which can increase its cost despite lower raw material consumption.

Our factory also produces:

View Full Product Catalog

Ornament Complexity: From Smooth to Carved

Smooth profiles without ornamentation are the most budget-friendly category. Simple ogee, torus, and straight strips are produced in simple molds and do not require complex detailing. The price of such moldings starts from 100-150 rubles per linear meter. These are workhorses for minimalist interiors where structure is important without decorativeness.

Geometric ornaments - egg-and-dart, bead-and-reel, Greek key - are of medium complexity and price. A repeating rhythmic pattern requires precision in molds but is not critical to minor defects. The price of such elements is 300-600 rubles per meter depending on size. This is the golden mean - decorative enough but not overloaded.

Floral ornaments - acanthus leaves, grapevines, roses - are the highest level of complexity. Each leaf, each petal requires detailed work in the mold. Relief depth can reach 3-5 cm. Such elements cost 800-2000 rubles per meter and above. But the visual effect of luxury they create justifies the investment.

Exclusive ornaments developed from individual sketches fall outside standard pricing. The cost of developing a master model and manufacturing a mold can be 50,000-150,000 rubles. But if you need uniqueness not available in standard catalogs, this is the only way. When producing a batch of 50-100 meters, the unit cost becomes acceptable.

Material Density: The Weight of Quality

Polyurethane density is a characteristic that buyers often overlook, but it critically affects quality and durability. Cheap molding has a density of 200-250 kg/m³. It is soft, easily indented with a finger, has a rough surface, and unclear relief. It lasts 5-7 years, then deforms and yellows.

Standard molding with a density of 300-350 kg/m³ is the optimal choice for most projects. Sufficiently durable, with good detailing, long-lasting. This is the bulk of products in the mid-price segment. A linear meter of cornice of this density costs 500-1000 rubles depending on size and ornament.

Premium molding with a density of 380-420 kg/m³ is designed for projects where quality outweighs cost savings. It offers a flawless surface, intricate detailing, and maximum durability. These products are 30-50% more expensive than standard ones but last for decades without any changes. For formal interiors and representative spaces, this is the only correct choice.

A way to check density in a store is to weigh the element. A meter-long cornice 10 cm wide of standard density weighs 400-500 grams. If it weighs 200-300 grams - you are looking at cheap polystyrene or low-density polyurethane. If 600-700 grams - premium dense material. Scales don't lie.

Brand and Geography of Production

European manufacturers - Orac Decor, NMC, Europlast - are traditionally 50-100% more expensive than Russian ones. Their molding costs 1000-3000 rubles per meter of cornice depending on the model. This is explained not only by the quality of raw materials and production but also by logistics, customs duties, and exchange rates. For premium interiors, European brands are a sign of quality.

Russian manufacturers offer an excellent price-to-quality ratio. Modern equipment, European raw materials, but production in Russia reduces logistics costs. Prices are 30-50% lower than European ones with comparable quality. This is a reasonable choice for most projects where savings are important without loss of quality.

Chinese products are the cheapest but with unpredictable quality. You can find quite decent molding for 200-400 rubles per meter. Or you can get soft, deformed, coarsely detailed product. If buying Chinese, be sure to check samples in person, don't trust photos alone.

Local small-scale producers can offer unique conditions - custom sizing, non-standard profiles, flexible prices for large orders. Quality varies, but with established contact, this is a source of interesting solutions.

Price Categories: From Economy to Premium

Economy segment: 100-400 rubles per meter

These are simple profiles made of medium or low-density polyurethane. Smooth cornices, baseboards, moldings without ornamentation or with simple geometric relief. Width is typically 5-8 cm. The surface may have minor defects — slight graininess, micropores. Additional priming is required for painting.

Where to use budget molding? In auxiliary spaces — hallways, storage rooms, utility rooms. In rental apartments undergoing renovation. In budget projects where the main goal is to create structure, not to display luxury. For first-time DIY installation experience, where mistakes are inevitable and it's a shame to ruin expensive material.

Advantages — affordability, the ability to decorate large areas with minimal expense. Disadvantages — average service life of 5-10 years, possible yellowing from UV radiation, somewhat coarse detailing. But if the budget is limited, the economy segment allows for having molding instead of bare walls.

Price examples in this segment: smooth molding 4 cm — 120-180 rubles/meter, simple baseboard 7 cm — 200-300 rubles/meter, basic cornice 6 cm — 250-350 rubles/meter. For a room with a perimeter of 18 meters, 18 meters of cornice costing 4500-6300 rubles will be needed. Affordable for practically everyone.

Standard segment: 400-1000 rubles per meter

The bulk of products on the market. Polyurethane with a density of 300-350 kg/m³, good detailing, variety of profiles and ornaments. Width from 6 to 12 cm. The surface is smooth, primed, ready for painting. Elements in this category are suitable for most residential interiors — apartments, houses, offices.

Polyurethane stucco decorOrnamentation in the standard segment includes classical patterns — egg-and-dart, dentils, simple floral motifs. The relief is expressive enough to create a play of light and shadow, but not excessive. This is a balance between decorativeness and restraint, suitable for classical and neoclassical interiors.

Where to use the standard segment? In living rooms, bedrooms, studies, dining rooms. In apartments intended for long-term preservation. In mid-level interiors where quality is important but there's no need for exclusivity. This is the workhorse of classical design — reliable, beautiful, accessible.

Price examples: molding with ornament 6 cm — 450-650 rubles/meter, cornice with modillions 10 cm — 700-950 rubles/meter, rosette diameter 50 cm — 3500-5500 rubles, pilaster height 200 cm — 8000-12000 rubles per set (base+shaft+capital). Decorating a 20 m² living room will cost 25000-40000 rubles including installation.

Premium segment: 1000-3000 rubles per meter and above

Top-tier products from leading manufacturers. Polyurethane with a density of 380-420 kg/m³, perfect surface, finest ornament detailing. Width from 10 to 20 cm and more. Complex multi-tiered profiles, deep relief, exclusive designs. The surface may be pre-primed with special compounds for gilding or decorative effects.

The ornamentation of the premium segment — Baroque scrolls, detailed acanthus leaves, sculptural compositions. Each element is a work of art, created based on historical samples or author's sketches.molding decoration photosThe elements in premium brand catalogs impress with their detailing — every leaf vein, every scroll is visible.

Where to use premium molding? In formal interiors — representative living rooms, home theaters, libraries. In country residences where the interior is created for decades. In reconstructions of historical buildings where authenticity is important. In projects where the budget allows not to skimp on details.

Price examples: wide ornamented cornice 15 cm — 1500-2500 rubles/meter, large rosette diameter 100 cm — 12000-20000 rubles, pilaster with a rich capital height 250 cm — 25000-40000 rubles per set. Overlay with Baroque ornament 40×60 cm — 8000-15000 rubles. Decorating a 40 m² formal living room can cost 150000-300000 rubles for materials alone.

Catalog of elements with prices: from cornices to overlays

Ceiling cornices: the upper boundary of the interior

Cornices are the most in-demand category of molding. They run along the perimeter of the room at the junction of walls and ceiling, concealing the technical seam, creating architectural completeness.Polyurethane Crown MoldingCornices are presented in hundreds of profile variations — from laconic to luxurious.

Narrow cornices 5-7 cm wide are suitable for low-ceilinged rooms and minimalist interiors. Price 250-500 rubles per meter. Smooth profile or simple geometric ornament. Visually not oppressive, create a delicate framing. For a room with an 18-meter perimeter, 18 meters of cornice costing 4500-9000 rubles will be needed.

Medium cornices 8-12 cm wide — a universal solution for standard apartments with ceilings 260-280 cm. Price 500-1200 rubles per meter. Variety of ornaments — from restrained to rich. Create a noticeable architectural line, structure the space. Cost for a 20-meter perimeter — 10000-24000 rubles.

Wide cornices 13-20 cm for high-ceilinged rooms from 3 meters and formal interiors. Price 1200-2500 rubles per meter. Multi-tiered profiles, large ornament, often with modillions or dentils. Visually powerful, create a sense of palatial luxury. For a large hall with a 30-meter perimeter, 36000-75000 rubles will be needed.

Lighting cornices with a groove for LED strip — a modern solution. A special design with an 8-12 cm offset from the ceiling allows for placing lighting. Price 700-1500 rubles per meter depending on width and ornament. Create a floating ceiling effect, visually increase the height of the room.

Ceiling Rosettes: Central Accents

ceiling rosettesRosettes — round or polygonal elements placed at the point of chandelier attachment. They conceal the electrical outlet, create a compositional center on the ceiling. Sizes from compact 30 cm to impressive 150 cm in diameter.

Small rosettes 30-40 cm in diameter are suitable for small rooms and compact light fixtures. Price 1500-3500 rubles. Moderate ornament — geometric rosettes, simple floral motifs. For bedrooms, children's rooms, small living rooms. Mounted with adhesive in 15-20 minutes.

Medium rosettes 50-70 cm — standard for living rooms 18-25 m² in area. Price 3500-8000 rubles. Variety of designs — from classical acanthus leaves to Baroque compositions. Create a noticeable accent, attract the eye, organize the space around the light fixture. In combination with a corresponding cornice, they form an integral composition.

Large rosettes 80-120 cm for spacious halls and high ceilings. Price 8000-20000 rubles and above. Complex multi-tiered relief, detailed sculptural workmanship. Such a rosette is an independent work of art, a dominant feature of the interior. In formal living rooms, halls of country houses, it creates an impression of palatial luxury.

Oval and rectangular rosettes for non-standard solutions. Used in elongated rooms, above dining tables, in enfilades. Price depends on size and complexity — from 4000 to 25000 rubles. Less common, but create an original effect, distinguishing the interior from standard solutions.

Moldings: Universal Lines

Moldings — profiled strips for creating frames on walls, separating levels, framing openings. The most diverse category in terms of profiles and purpose.Price of polyurethane moldingsranges from 150 to 1500 rubles per meter.

Narrow moldings 2-4 cm for creating thin frames, delicate decoration. Price 150-400 rubles/meter. Smooth or with simple relief. Suitable for modern interiors where stucco is a graphic accent, not lavish decor. To create three 100×80 cm frames on a wall, about 11 meters of molding costing 1650-4400 rubles will be required.

Medium moldings 5-8 cm are the workhorses of classic interiors. Price 350-750 rubles/meter. Variety of profiles and ornaments. Create noticeable frames, divide walls into levels, frame doors and windows. For paneling a room with three frames, 25-30 meters of molding costing 8750-22500 rubles will be required.

Wide moldings 9-12 cm for large-scale compositions. Price 700-1500 rubles/meter. Complex multi-profile sections, rich ornamentation. Used in high-ceilinged spaces where noticeable architectural elements are needed. Combined with pilasters, they create a system of order decoration.

Flexible moldings for curved surfaces — arches, columns, bay windows. Price 500-1200 rubles/meter depending on width. A special elastic polyurethane composition allows bending the profile along a radius from 50 cm. Indispensable in non-standard layout rooms where rigid moldings would have to be assembled from many short segments.

Baseboards: Completing the Composition

Floor skirting boards cover the joint between wall and floor, protect the lower part of the wall from mechanical damage.polyurethane baseboardsmoisture-resistant, durable, easy to install. Height from 6 to 20 cm.

Low skirting boards 6-8 cm — a modern solution for minimalist interiors. Price 200-450 rubles/meter. Simple profile, often smooth without ornament. Visually unobtrusive, create a neat floor framing. For an apartment with a wall perimeter of 70 meters, 14000-31500 rubles will be required.

Medium skirting boards 10-14 cm — a classic choice for traditional interiors. Price 400-800 rubles/meter. Profiled surface with or without ornament. Combine with moldings and cornices, creating a unified decorative system. Cost for the same apartment — 28000-56000 rubles.

High skirting boards 15-20 cm for formal interiors and rooms with high ceilings. Price 700-1500 rubles/meter. Multi-tiered profile, ornament possible. Visually elevate the room, create a sense of solidity. Combined with a high cornice, they form the architectural frame of the interior.

Flexible skirting boards for curved walls, columns. Price 450-900 rubles/meter. Follow the curves of the base without the need to assemble from short segments. Simplify installation in non-standard rooms, provide visual integrity.

Appliques: Local Decoration

Decorative Inserts— small relief elements to enrich basic forms. Placed on walls, doors, furniture. Sizes from miniature 10×10 cm to large 60×80 cm. Price from 500 to 15000 rubles per piece.

Small overlays 10×15 cm for furniture, door panels. Price 500-1500 rubles/piece. Simple rosettes, geometric ornaments. Create local accents on cabinets, dressers, interior doors. To decorate a door, 4-6 overlays costing 2000-9000 rubles will be required.

Medium overlays 20×30 cm for walls, corners of molding frames. Price 2000-5000 rubles/piece. Floral or classic ornaments. Placed in the centers of panels, corners of frames, above door openings. Four overlays for an accent wall will cost 8000-20000 rubles.

Large overlays 40×60 cm and more for formal compositions. Price 5000-15000 rubles/piece. Complex baroque compositions, sculptural reliefs, cartouches. Such an overlay is an independent art object, attracting attention. One or two pieces on an accent wall create a focal point of the interior.

Corner overlays for molding joints. Price 1500-4000 rubles/piece. Instead of a simple 45° miter cut — a decorative element that beautifully covers the intersection point. Characteristic of classic interiors where every detail is thought out.

Pilasters and half-columns: vertical architecture

Pilasters — vertical elements imitating flat columns. Consist of base, shaft, capital. Height corresponds to room height — usually 200-280 cm.Polyurethane pilasterssold as sets or individual parts.

Simple pilasters with smooth shaft and laconic capital. Set price 6000-12000 rubles. Suitable for modern interpretations of classicism, where architectural logic is important without excessive decor. A pair of pilasters frames a fireplace, media center, library — cost 12000-24000 rubles.

Classic pilasters with fluted shaft and order capital — Ionic, Doric, Corinthian. Price 10000-20000 rubles per set. Reproduce historical models, create an authentic classic interior. To decorate one wall with a pair of pilasters, 20000-40000 rubles will be required.

Decorative pilasters with ornamented shaft and rich capital. Price 15000-35000 rubles per set. Baroque opulence, complex relief, sculptural detailing. For formal interiors where every detail is a work of art. Four pilasters for a colonnade along a wall will cost 60000-140000 rubles.

Half-columns protrude from the wall by half or one-third of the diameter, creating a more powerful volume. Set price 12000-40000 rubles depending on diameter and height. Used in spacious rooms where scale allows. Create a dramatic architectural effect.

Photo gallery: how to read catalogs

What the photos of elements show

Photos of polyurethane stuccoin catalogs — these are not just pictures, but a source of important information. Professional photos of an element on a white background show the profile, ornament, proportions. Usually several angles are taken — frontal, angular, close-up of ornament details.

A frontal shot gives an idea of the profile — the combination of protrusions and recesses creating light and shadow play. From the photo, you can assess the complexity of the relief — how many depth levels, how large the details are. A simple profile with one or two breaks looks calm. Multi-tiered with ornament — saturated.

An angular shot at 45° shows the depth of the element's protrusion from the wall. A cornice can protrude 5-20 cm — this is critically important when planning, especially if there are windows, cabinets, or other structures nearby. Molding usually protrudes 1-3 cm — more delicate. A pilaster can protrude 3-8 cm depending on the order.

Macro photography of ornament details demonstrates the quality of detailing. Are the edges of leaves clear? Are small veins visible? Is the relief deep? From these photos, an experienced eye can distinguish cheap stucco with simplified relief from premium stucco with museum-level detailing.

Photos in interiors: context of application

Photographs of finished interiors with installed molding are more valuable than catalog images of individual elements. They show how the product looks in real application, how different elements combine, and what effect is created. Professional manufacturers publish galleries of completed projects.

Pay attention to scale in interior photos. A wide cornice looks harmonious in a spacious living room. The same cornice in a small room with 250 cm ceilings will feel oppressive. Assess the correspondence between the sizes of elements and the room. If your room is smaller, choose a narrower profile.

Lighting in photos shows the play of light and shadow. Relief molding comes to life with proper lighting. Side lighting from a window or sconce creates expressive shadows that emphasize volume. Diffused light softens the relief. When choosing an ornament, consider how your room will be illuminated.

Color solutions in photos inspire. White molding on white walls is a classic. Contrasting molding is a bold modern solution. Gilded molding is luxury. Patinated molding creates an antique effect. Look at photos to see which combination resonates with you and matches your interior vision.

Drawings and diagrams: technical information

Dimensional drawings are an essential part of a catalog for professional selection. A drawing shows the profile of an element to scale with all dimensions indicated — height, width, depth of projection, thickness. This allows for precise planning of installation, calculation of offsets, and verification of compatibility with structures.

A cornice drawing indicates height (A), width (B), and depth of projection (C). All three parameters are important for planning. Height determines how much the cornice will lower the visual ceiling line. Width determines how noticeable it will be. Projection — whether it will interfere with windows, curtains, or built-in furniture.

Molding drawings show the profile cross-section. They illustrate how the corner joint of two strips will look and what relief will result. For complex multi-profile moldings, a drawing helps understand the construction and plan miter cuts.

Installation diagrams illustrate the method of installing an element. They show points for applying adhesive, direction of pressure, and method of joining corners. For beginners, this is invaluable information that helps avoid mistakes during DIY installation.

Comparative analysis: price table by categories

Element	Size	Economy	Standard	Premium
Narrow cornice	5-7 cm	250-400 RUB/m	450-700 RUB/m	900-1400 RUB/m
Medium cornice	8-12 cm	400-600 RUB/m	700-1200 RUB/m	1400-2200 RUB/m
Wide cornice	13-20 cm	650-1000 RUB/m	1200-2000 RUB/m	2200-3500 RUB/m
Narrow molding	2-4 cm	150-300 RUB/m	350-600 RUB/m	700-1200 RUB/m
Medium molding	5-8 cm	300-500 RUB/m	550-900 RUB/m	1000-1700 RUB/m
Low skirting board	6-8 cm	200-350 RUB/m	400-650 RUB/m	750-1200 RUB/m
Medium skirting board	10-14 cm	350-550 RUB/m	600-1000 RUB/m	1100-1800 RUB/m
Small socket	30-40 cm	1500-2500 RUB	2800-4500 RUB	5000-8000 RUB
Medium rosette	50-70 cm	2500-4500 RUB	5000-9000 RUB	10000-16000 RUB
Large rosette	80-120 cm	5000-9000 RUB	10000-17000 RUB	18000-30000 RUB
Small overlay	10×15 cm	500-1000 RUB	1200-2500 RUB	2800-5000 rub
Medium overlay	20×30 cm	1200-2500 RUB	2800-5500 rub	6000-10000 rub
Large overlay	40×60 cm	3000-6000 rub	6500-11000 rub	12000-20000 rub
Simple pilaster	200-280 cm	6000-9000 rub	10000-16000 RUB	18000-28000 rub
Classical pilaster	200-280 cm	9000-14000 rub	15000-24000 rub	26000-40000 rub

This table provides approximate prices for early 2026. Actual cost may vary depending on the specific manufacturer, sales region, order volume, and seasonal promotions. Use the table as a starting point for budget planning.

Factors reducing cost

Order volume: wholesale discounts

Manufacturers and large distributors offer progressive discounts based on order volume. For purchases of 30,000-50,000 rubles, the discount is 5-7%. From 50,000 to 100,000 rubles — 10-12%. Over 100,000 rubles — 15-20%. When furnishing an entire apartment or house, savings can amount to tens of thousands of rubles.

Group purchases with neighbors, friends, or colleagues allow reaching the volume for wholesale discounts. If several people are planning renovations simultaneously, combining orders benefits everyone. Arrange on forums for new building residents or in renovation groups — many are looking for partners for joint purchases.

Seasonal sales reduce prices by 20-40%. Manufacturers periodically clear warehouses of discontinued collection items and discontinued models. Quality is not compromised — it's simply an assortment update. Follow news on websites, subscribe to newsletters. Buying molding in December-January can save a third of the budget.

Loyalty programs for regular customers provide cumulative discounts. First purchase — standard price. Second — 3% discount. Third — 5%. And so on up to 10-15%. If planning phased interior decoration — first living room, then bedrooms — buy from one supplier, accumulating bonuses.

Self-installation: saving on labor

Professional installation of molding costs 200-500 rubles per linear meter for cornices and moldings, 1500-3000 rubles for a rosette, 5000-10000 rubles for a pilaster. For comprehensive apartment decoration, labor can cost as much as materials — 50,000-100,000 rubles. Self-installation eliminates these expenses.

Simple elements — cornices, baseboards, moldings — can be installed without special skills. Basic tools are needed: a miter saw or handsaw with a miter box, a mounting gun, level, tape measure. The total cost of tools (3000-5000 rubles) pays for itself in one project. Video tutorials online show the process step by step.

Complex elements — rosettes, pilasters, overlays — are also accessible for DIY installation but require care. The main risk is inaccurate marking. Take time for thorough measurements, use a laser level. It's better to measure twice and glue once than to correct mistakes.

Time savings from professionals are compensated by your efforts. A master will install cornices around a room perimeter in 3-4 hours. You'll need a full day with breaks. But it's your time, your pace, your quality control. For many, the process of creating an interior with their own hands is not just savings but also enjoyment.

Choosing the optimal configuration

Excessive decoration increases costs without proportional visual impact. A wall filled with many small frames, overlays, and ornaments can appear cluttered. One or two large frames will create structure at a lower cost. The 'less is more' principle saves budget and improves results.

Combining expensive and budget elements is a reasonable strategy. Accent zones—the wall behind the sofa, the fireplace portal—are decorated with premium molding. Other surfaces use standard molding. The difference in quality is not noticeable, but savings amount to 30-40% of the total budget.

Eliminating secondary elements reduces costs. Vertical overlays on the sides of frames are beautiful but not essential. Corner overlays are elegant, but simple miter cuts of moldings at 45° work just as well. Analyze which elements are critical to the composition and which are optional. Keep the critical ones; exclude optional ones or add them later.

Staged decoration spreads expenses over time. First, install cornices around the perimeter—this is the basic architectural structure. After a few months, add wall moldings. Another six months later—add overlays and rosettes. The interior grows gradually, with the budget distributed over one to two years without credit strain.

How to choose from a catalog: step-by-step instructions

Step 1: Determine style and scale

Before opening the catalog, answer the question: what interior style are you creating? Strict classic requires symmetrical compositions, order pilasters, and restrained ornamentation. Baroque—opulent forms, abundant decoration. Modernity—concise profiles without excess. Style determines the choice of elements.

The scale of the room dictates the size of the decor. For a room of 12-15 m² with 250 cm ceilings, cornices 5-7 cm wide, moldings 4-6 cm, and rosettes 30-40 cm in diameter are suitable. For a spacious living room of 30-40 m² with 320 cm ceilings—cornices 12-15 cm, moldings 8-10 cm, rosettes 70-100 cm. Scale mismatch is a common mistake.

Ceiling height is critical for choosing cornice width. General rule: cornice width should be 1/20-1/30 of the wall height. With 270 cm ceilings, the optimal cornice width is 9-13 cm. With 320 cm—11-16 cm. A too-narrow cornice will get lost; a too-wide one will overwhelm the space.

Color concept influences relief choice. If contrasting painting of molding is planned—white on a dark background—the ornament should be expressive to be clearly readable. If monochrome—molding matching the wall color—the relief should be deep to create a play of light and shadow.

Step 2: Explore the assortment by categories

molding online storeThe catalog is structured by categories—cornices, moldings, rosettes, pilasters, overlays. Start with basic elements—cornices and baseboards, which create the architectural frame. Then move to accents—rosettes, overlays, pilasters.

Within each category, elements are grouped by size and style. Filters help narrow the selection. Set parameters: width 8-12 cm, style—classic, price—up to 1000 rubles per meter. The system will show suitable models. This is more efficient than browsing hundreds of items in a row.

Compare models within the same price category. Open 3-5 cornices 10 cm wide costing 700-900 rubles per meter. Study photos, drawings, descriptions. Which profile is more expressive? Which ornament is closer to your style? Comparison helps identify nuances that are not noticeable when viewing in isolation.

Pay attention to collections. Manufacturers often group elements into stylistically unified collections—all elements share similar ornamentation, proportions, and character. By choosing a cornice from the 'Classic' collection, select moldings, rosettes, and pilasters from the same collection. This ensures compositional harmony.

Step 3: Assess quality from photographs

Ornament detail is the main visual quality criterion. Examine macro photos of the relief. Are the contours of leaves and scrolls clear? Are small veins and textures visible? Or has everything merged into a general mass? Quality molding has jewelry-level detail; cheap molding has simplified relief.

The surface should be smooth, without cavities, pores, or drips. In photos of a quality element, the surface is uniform and matte. Cheap molding has graininess visible even in photos. This results from using low-density polyurethane or poor molds.

Profile geometry is checked via photos from different angles. Lines should be strictly straight, without waves or bends. Corners should be sharp, without rounding. If irregularities are visible in the photo—they will be even more noticeable in reality. Refuse such a product.

The color of the primed surface should be uniformly white or cream, without spots or streaks. Uneven coloring indicates poor-quality priming, which will require additional preparation before finishing.

Step 4: Check technical specifications

Dimensions are specified to the millimeter. Height, width, thickness, strip length—all parameters should be in the description. Check if the dimensions on the drawing and in the text description match. Discrepancies indicate manufacturer carelessness, which may also manifest in product quality.

Element weight indirectly indicates material density. A one-meter cornice 10 cm wide should weigh 400-600 grams with standard polyurethane density. If the weight is 250-300 grams—it's low-density material or polystyrene. If 700-900 grams—it's high-density premium polyurethane.

Bending radius for flexible elements is a critical parameter. If you need to wrap around a column 40 cm in diameter (radius 20 cm), the molding must have a minimum bending radius of no more than 20 cm. Manufacturers specify this parameter for flexible profiles. Do not attempt to bend rigid molding—it will break.

Application recommendations indicate the conditions for which the element is intended. Universal polyurethane is suitable for any room. Facade-grade has enhanced UV protection. Moisture-resistant is approved for bathrooms and saunas. Use elements as intended for maximum durability.

Step 5: Calculate quantity and budget

Accurate room measurements are the basis of calculation. Perimeter for cornices and baseboards, wall lengths for moldings, number of functional zones for rosettes and overlays. Record all dimensions, draw a room plan. Better to spend an hour measuring than to buy missing items or return excess.

Allowance for cutting and defects is 10-15% of the calculated quantity of linear elements. Cornices and moldings are cut at angles, joined—waste is inevitable. Defects may occur during transportation. Include a reserve. For a 20-meter perimeter, order 22-23 meters of cornice.

Calculators on manufacturer websites automate calculation. Enter room dimensions, select elements—the system calculates quantity and cost. This is convenient, but check the result manually. Algorithms do not always account for layout nuances—protrusions, niches, complex corners.

The final estimate includes the cost of elements, delivery, installation (if not DIY), and consumables (adhesive, paint, primer). Add up all items, allocate a 10-15% reserve for unforeseen expenses. A realistic estimate protects against unpleasant surprises during project implementation.

Frequently asked questions about prices and selection

Why is polyurethane molding cheaper than plaster?

Polyurethane is a synthetic polymer produced from petrochemical feedstock using automated technology. Plaster is a natural mineral requiring manual work by skilled craftsmen to create complex shapes. Automation versus manual labor determines the price difference. A polyurethane cornice costs 500-1500 rubles per meter, while a plaster one of similar complexity costs 2000-5000 rubles.

Weight also affects cost. Polyurethane is 8-10 times lighter than plaster. Transportation, storage, and installation are cheaper. Plaster molding requires special transport, insurance against breakage, and installation by a team with reinforced fastenings. Polyurethane can be delivered by regular courier service and glued by one person in a day.

Durability is comparable—both materials last for decades with proper installation. Plaster is more eco-friendly, has a noble matte texture, and is completely non-flammable. Polyurethane is moisture-resistant, stronger, and more practical. For most residential projects, the advantages of polyurethane outweigh the romance of plaster.

Does color affect the price of molding?

Basic molding is supplied white or cream—this is a primed surface ready for painting. Price is determined by size, complexity, density, not the primer color. The difference between white and cream primer is 5-10 rubles per meter, insignificant.

Pre-painted molding in catalog colors costs 20-30% more than basic. The manufacturer applies the finish paint in factory conditions—evenly, with quality, and guaranteed coverage. You receive a ready-made element, saving time on painting. Convenient, but more expensive.

Patinated, gilded, or aged-effect molding is a premium category. Decorative finishing is applied manually by craftsmen. Price increases 2-4 times compared to basic. A cornice costing 1000 rubles with patina will cost 2500-4000 rubles. For exclusive interiors where every detail is unique.

DIY painting is the most economical option. Buy basic white molding, paint it yourself in the desired color. A 2.5-liter can of acrylic paint costs 1000-2000 rubles, enough for 40-60 meters of cornice. Significant savings, full quality control.

Can molding be returned if it doesn't fit?

The Consumer Protection Law applies to molding as a finishing material. If an element has a manufacturing defect—incorrect dimensions, surface defects, breakage—return is unconditional within the warranty period, usually 12 months. The seller is obligated to replace or refund.

If the molding is of good quality but you simply don't like it—a subjective reason—return depends on the store's policy. Large chain sellers often allow returns within 14 days if the product and packaging are intact. Small specialized stores usually do not accept returns without defects.

Custom elements made to order according to individual dimensions are non-returnable. You ordered a pilaster 295 cm high for your ceiling—the manufacturer made it. Such an item cannot be sold to another buyer, so return is excluded. Carefully check dimensions before ordering.

Before purchase, clarify the return conditions with the specific seller. This protects against unpleasant surprises if the molding doesn't suit in color, scale, or style. Some stores offer free samples—order a 20-30 cm piece of molding, evaluate it in person before the main order.

Does polyurethane molding become more expensive over time?

Prices for polyurethane molding correlate with prices of petrochemical feedstock and currency exchange rates. Polyurethane is produced from polyols and isocyanates—petrochemical products. Rising oil prices lead to a 10-20% increase in raw material costs within a year. Ruble devaluation increases the cost of imported raw materials proportionally to the exchange rate change.

Inflation also contributes—general price growth in the economy of 5-7% per year is reflected in molding. In 2020, the average cornice cost 600 rubles per meter. In 2023—750 rubles. In 2026—850 rubles. Annual growth of 7-9%. Delaying purchase risks encountering higher prices.

But technological progress and competition restrain growth. New manufacturers increase supply, stimulating price competition. Production optimization reduces costs. In some categories, prices remain stable or even decrease despite inflation.

Strategy: if budget allows, buy now. Molding stores for years without losing properties. Purchased today at current prices, it can be installed in six months to a year when prices rise another 5-10%. You lock in current cost, protecting against future price increases.

Does price differ in Moscow and the regions?

Moscow and St. Petersburg are regions with maximum concentration of manufacturers, warehouses, and retail outlets. Competition is high, logistics short, prices relatively low. The average cornice in Moscow costs 700-900 rubles per meter. In St. Petersburg—similar or 5-10% higher.

Large regional centers—Yekaterinburg, Novosibirsk, Kazan, Nizhny Novgorod—have representative offices of major manufacturers. Prices are 10-15% higher than Moscow due to logistics, but selection is sufficient. The same cornice will cost 800-1050 rubles per meter.

Small towns and remote regions—Far East, Siberia, North—face limited supply and high prices. The difference with Moscow reaches 30-50%. A cornice costing 700 rubles in the capital costs 950-1100 rubles in Vladivostok. Transport costs, low sales volumes, lack of competition explain the difference.

Online trade levels regional differences. Ordering directly from the manufacturer with delivery to your city, you pay the Moscow price plus transport. For Yekaterinburg, delivery of 20 meters of cornice costs 1500-2500 rubles. For Vladivostok—5000-8000 rubles. Total may be more or less advantageous than local purchase—calculate specifically.

What hidden expenses to consider besides the price of molding?

Adhesive for installation—specialized polymer composition in 310 ml tubes. One tube costs 200-400 rubles, used for 4-6 meters of cornice depending on width. For a room with a 20-meter perimeter, 4-5 tubes costing 800-2000 rubles are needed. Universal construction adhesive is cheaper but holds worse—savings are questionable.

Paint for finish coating—acrylic water-based matte or semi-matte. Consumption: 1 liter per 8-10 m² of molding surface. For 20 meters of cornice 10 cm wide, a 2.5-liter can costing 1000-2500 rubles depending on quality is needed. Premium paints with perfect coverage cost 3000-5000 rubles per 2.5 liters.

Primer is necessary to improve paint adhesion. Special primer for polyurethane costs 500-1000 rubles per liter, consumption similar to paint. Some manufacturers supply molding already primed—additional priming is not required. Clarify this point.

Delivery varies from free for orders above a certain amount to 3000-10000 rubles depending on region and volume. Large-sized elements—long cornices 240 cm, large rosettes—require special packaging and transport. Clarify delivery cost before placing an order.

Installation tools — if you don't have a miter saw, miter box, or nail gun, you'll need to buy or rent them. Purchasing a basic kit will cost 3000-5000 rubles. Renting professional tools costs 500-1000 rubles per day. For a one-time project, renting is more cost-effective; for several rooms, purchasing is better.

Is it worth buying cheap molding from China?

Chinese products vary in quality. There are factories producing quite decent molding using European technologies with quality control. There are also small-scale workshops producing outright defective goods. The problem is that it's impossible to distinguish them from photos online.

The price of Chinese molding is 30-50% lower than Russian molding of similar sizes. A cornice that costs 800 rubles per meter in Russia will cost 400-550 rubles from China. It's tempting, especially for large volumes. But the risks are high — soft material, rough relief, geometric deviations.

How to minimize risk when buying Chinese? Order samples before the main batch. One or two meters of cornice, one overlay for in-person evaluation. Check density, detailing, geometry. If the quality is satisfactory — order the rest from the same manufacturer, specifying the sample article numbers.

Read reviews from other buyers. Chinese goods on marketplaces have hundreds of reviews with photos. Study the negative ones — what are the complaints? If softness, warping, or size discrepancies are mentioned frequently — avoid that seller. Look for items with 80%+ positive reviews and real photos from buyers.

Is molding for wet rooms more expensive?

Basic polyurethane is inherently moisture-resistant. It doesn't absorb water, doesn't swell, doesn't deform with humidity. Molding for the living room and bathroom is made from the same material. The difference lies in the finish and the presence of additional additives.

Specialized molding for bathrooms has enhanced mold protection — fungicides are added to the composition. This prevents black spots from appearing under constant humidity. Such elements are 10-15% more expensive than basic ones. A cornice costing 800 rubles with anti-fungal protection will cost 900-920 rubles.

But in most cases, regular polyurethane molding with moisture-resistant paint is sufficient. Paint the elements with paint for wet rooms containing an antiseptic — the effect is similar to specialized products, but the cost is lower. A 2.5-liter can of such paint costs 200-300 rubles more than regular paint.

Polyurethane is not suitable for saunas and steam rooms — temperatures of 80-100°C cause softening and deformation. Heat-resistant molding made from special composites or natural wood is used there. It is 3-5 times more expensive than polyurethane. But for regular bathrooms, standard polyurethane is optimal.

Does the price change with custom manufacturing?

Custom manufacturing requires creating a unique master model and mold. The cost of developing and producing the mold is 30,000-150,000 rubles depending on size and complexity. These are fixed costs, independent of the number of items produced.

When ordering one or two elements, the full cost of the mold falls on them. An exclusive cornice could cost 50,000 rubles for 2 meters instead of 2,000 rubles for a standard one. This is only justified for unique projects where standard solutions are unacceptable.

When ordering a series of 50-100 meters or 20-50 pieces, the mold cost is distributed across all items. The unit cost becomes comparable to mass-produced items plus 30-50%. An exclusive cornice in a series will cost 1200-1500 rubles per meter instead of 800-1000 for a standard one. The markup is moderate for uniqueness.

An alternative — modifying existing elements. Manufacturers often create variations of basic models upon request — different widths, simplified or more intricate ornamentation. Modifying an existing mold is cheaper than creating a new one — 10,000-30,000 rubles. This is a compromise between standardization and uniqueness.

Does molding pay off when selling an apartment?

Quality molding increases the perceived value of an interior. An apartment with architectural decor looks more expensive than a similar one with bare walls. Buyers associate molding with premium quality and are willing to pay more. The actual price increase is 3-7% of the apartment's value.

For an apartment worth 10 million rubles, molding can add 300,000-700,000 rubles to the selling price. If 150,000-250,000 rubles were spent on decoration, the return is 1.5-3 rubles for every ruble invested. The return on investment is positive; molding works as an investment in property value.

But the effect depends on the target audience of buyers. If your apartment targets young professionals who prefer minimalism, classical molding may not add value. If it targets families with conservative tastes — the effect is maximum. Assess your market segment.

Overdoing decor reduces the effect. Molding should look appropriate, not like a museum. Moderate decoration — cornices around the perimeter, a ceiling medallion for the chandelier, 2-3 wall frames — increases appeal. Excessive — molding on every wall, many pilasters, an abundance of overlays — can deter buyers.

Photo gallery: inspiration from the 2026 catalog

Classic living rooms: harmony of proportions

While browsing themolding catalog with photos, pay attention to interiors where decor creates a clear architectural structure. A 25 m² living room with a 12 cm wide cornice running along the perimeter at a height of 270 cm. The wall behind the sofa is decorated with three vertical frames made of 8 cm molding. In the center of the ceiling — a 60 cm diameter medallion for a classic chandelier.

Color scheme — white molding on a light gray wall background. The contrast is subtle but sufficient to clearly reveal the relief. Lighting — a central chandelier plus two wall sconces on either side of the central frame. Side lighting from the sconces creates expressive shadows on the moldings, emphasizing volume.

On the sides of the composition — pilasters with Corinthian capitals, 260 cm high. They frame the accent wall, creating vertical axes. A 14 cm high baseboard around the perimeter of the living room completes the composition from below. Together, it forms an integral architectural system with clear proportions.

Material cost for such decoration: 12 cm cornice — 22 meters at 950 rubles = 20,900 rubles, 8 cm molding — 30 meters at 700 rubles = 21,000 rubles, 60 cm medallion — 6,500 rubles, pilasters — 2 sets at 15,000 rubles = 30,000 rubles, 14 cm baseboard — 22 meters at 750 rubles = 16,500 rubles. Total about 95,000 rubles for materials. Including adhesive, paint, delivery — 110,000-120,000 rubles.

Modern bedrooms: minimalism with character

Photos of modern interiors with polyurethane moldingsshow that decor is appropriate not only in classic styles. An 18 m² bedroom with a concise 6 cm wide cornice, smooth and without ornament. The wall behind the headboard is decorated with one large 220×140 cm frame made of thin 4 cm molding with a simple roll.

Inside the frame — wallpaper with a graphic geometric pattern in gray-beige tones. The molding and other walls are painted light gray, almost white. Contrast is created not by the color of the molding, but by the texture of the wallpaper inside the frame. No rosettes, overlays, pilasters — only pure geometry of lines.

Lighting — hidden LED strip behind the cornice creates soft diffused glow around the perimeter of the ceiling. Two swivel wall sconces on the sides of the frame for reading. Minimum elements, maximum functionality. The interior is concise but structured — the molding works as a graphic accent.

Cost: 6 cm cornice — 18 meters at 450 rubles = 8100 rubles, 4 cm molding — 12 meters at 350 rubles = 4200 rubles, LED strip with power supply — 3500 rubles. Total about 16000 rubles for materials. Including the rest — 20000-25000 rubles. A budget solution that provides architectural expressiveness.

Studies and libraries: respectability of details

A 20 m² study with a library wall decorated with pilasters. Five 270 cm high pilasters divide the 5-meter wall into four sections. Between the pilasters — built-in shelving with books. The pilasters are classical, with fluted shafts and Ionic capitals. Above the capitals — a wide 15 cm cornice with dentils.

Color scheme — pilasters painted to match dark walnut, in the same tone as the shelving. Capitals and cornice are white, creating contrast. The other walls of the study are in a warm beige color. This combination creates a sense of respectability, academicism, solidity.

The opposite wall behind the desk is decorated with a large panel. A frame made of wide 10 cm molding forms a 200×120 cm rectangle. Inside — the wall is upholstered in burgundy-colored leather. In the center of the frame — a bronze overlay with a heraldic shield. A desk lamp with a shade creates directional light on the panel.

Cost: pilasters — 5 classical sets at 16000 rubles = 80000 rubles, 15 cm cornice — 24 meters at 1500 rubles = 36000 rubles, 10 cm molding for the panel — 7 meters at 850 rubles = 5950 rubles, bronze overlay — 12000 rubles. Total about 134000 rubles for molding materials. Plus leather, painting — total decor budget 160000-180000 rubles. Expensive, but the result corresponds to a status room.

Company STAVROS: your reliable partner

Choosing qualitypolyurethane moldings at a reasonable pricerequires a reliable supplier who guarantees product quality, wide assortment, professional support. Company STAVROS has been in the architectural decor market for over two decades, establishing itself as a manufacturer of premium solutions for interiors.

STAVROS polyurethane molding catalogincludes over 500 items — cornices from concise to luxurious, moldings of all sizes and styles, ceiling rosettes from 30 to 150 cm in diameter, decorative overlays with classical and author's ornaments, pilasters and half-columns of all orders. Each element is produced on modern European equipment from certified raw materials.

The density of polyurethane in STAVROS products is 350-400 kg/m³ — a high standard guaranteeing durability and perfect relief detailing. All elements are primed with a special compound, ready for painting with any interior paints. The surface is smooth, without pores or defects. Geometric parameters are maintained with millimeter precision.

Prices for STAVROS moldingsare positioned in the standard-premium segment. Basic cornices start from 450 rubles per meter, medium — 700-1200 rubles, wide ornamented — 1400-2500 rubles. Moldings — 350-1500 rubles per meter. Rosettes — 2800-25000 rubles depending on diameter and complexity. Pilasters — 10000-35000 rubles per set.

These are not the lowest prices on the market. But the price-quality ratio is optimal. You pay for real material density, clear detailing, geometric accuracy, environmental safety. STAVROS products last for decades, do not yellow, do not deform, retain their original appearance.

Custom manufacturing — STAVROS specialization. If the catalog does not have the required element, the company's designers will develop it according to your sketches or historical samples. A master model is created, a mold, and the required quantity is produced. Development cost — from 35000 rubles depending on complexity. Minimum batch for economic feasibility — from 30-50 meters or 15-20 pieces.

Consulting support at all stages — from selection to installation. STAVROS designers will help select elements to match the interior style, create a visualization of the future composition, calculate the exact amount of material considering all room features. Technologists will provide recommendations on installation, selection of glue and paints, and explain the nuances of installation.

Logistics across Russia and CIS countries. Own warehouses in Moscow, St. Petersburg, regional centers ensure fast shipment. Delivery is organized by transport companies or own transport. Packaging protects fragile elements during transportation — individual wrapping, cardboard boxes, pallets for large batches.

Flexible pricing policy. Basic price lists on the website. Volume discounts — 7% from 50000 rubles, 12% from 100000 rubles, 18% from 200000 rubles. For designers, architects, construction companies — special partnership conditions. Regular seasonal promotions with 20-35% discounts on selected collections.

Quality guarantee — 24 months on all products. If a manufacturing defect is discovered during the warranty period — deformation, color change, structural failure — the element is replaced unconditionally. Return or exchange of goods of proper quality — within 14 days if the product appearance is preserved.

STAVROS is not just a seller of moldings. It is a partner in creating your dream interior. A company that understands that behind every order is your dream of a beautiful home. Which puts soul into every element, because it knows — this molding will serve you for decades, delight you every day, and impress guests.

Choosing STAVROS, you choose European-level quality at reasonable Russian prices. A wide assortment allowing the implementation of any design concept. Professional support at all stages. Guarantees protecting your investments. A reputation verified by thousands of satisfied customers and hundreds of completed projects.

Visit the STAVROS website, explore thecatalog with photos and prices, visually assess the quality. Order free samples of liked elements — receive them in hand, personally verify the quality. Consult with specialists — tell them about your project, receive expert recommendations.

Create an interior that's pleasant to live in. A space that tells your story. A home you want to return to. With STAVROS molding, this isn't a dream—it's an achievable reality. High-quality, beautiful, durable molding at honest prices. Your home deserves the best.