Wooden sofa legs in Moscow: how to choose and buy supports for upholstered furniture

The sofa holds a special place in the interior. It sets the tone for the entire living room, bedroom, or study—and is perceived as a cohesive object at first glance. But within this cohesive image, there is one detail that everyone sees, not everyone notices, and only a few appreciate. These are the legs. It is precisely the wooden supports under the sofa that determine whether it looks like an expensive piece or just an ordinary body on blocks.

Buying wooden sofa legs in Moscow is a task where it's easy and cheap to make a mistake, but doing it right means getting a result that will bring joy for years. This article is a detailed breakdown: what to choose, how to choose, for which sofas, according to what criteria, and exactly where to do it in Moscow.

---

Go to Catalog

What are wooden sofa legs and why are they needed

Wooden sofa legs are support elements made from solid natural wood that attach to the bottom of the soft furniture frame. They provide structural stability, distribute the load on the floor, create a gap between the sofa base and the surface, and also serve a decorative function, defining the visual character of the piece.

These seemingly small details have far more functions than it appears.

Structural. Four to six supports bear the entire load: the weight of the sofa itself (60–120 kg), the weight of people (100–250 kg dynamically), and the load from unfolding mechanisms. If the cross-section or load capacity is chosen incorrectly, the legs break, deform, and the sofa frame begins to deteriorate.

Practical. Wooden sofa supports lift the body off the floor. With leg heights from 8–10 cm — the vacuum cleaner works freely under the sofa, ventilation is maintained, and moisture does not accumulate at the base of the frame. This is especially important in bedrooms and children's rooms.

Aesthetic. This is the most underrated function. A cabriole leg under a classic sofa creates a completely different piece than the same sofa on straight square supports. The silhouette changes dramatically. The style — too.

Why wood specifically? Because a wooden sofa leg made from solid natural wood is an organic extension of the piece itself. Wood is visually warm, it is compatible with any fabric or leather upholstery, and it harmonizes with parquet, laminate, and natural stone. A metal support looks appropriate in loft and industrial interiors — and inappropriate everywhere else.

Wooden legs for sofas and other soft furniture by STAVROS— are over 130 models made from solid oak and beech with a height range from 5 to 25 cm, in several styles and two levels of finishing quality.

---

What wooden sofa legs can you buy in Moscow

Our factory also produces:

View Full Product Catalog

Straight wooden legs

A straight leg is cylindrical or square, vertical, without bends or shaped transitions. The most neutral type. Suitable for a wide range of styles: from modern classics to Scandinavian solutions with laconic forms.

A straight wooden sofa support works well where the upholstery or silhouette already contains decor — a large fabric pattern, a quilted front, a shaped back. In this case, the leg should not add a new element to the rich image — it should be a precise, calm foundation.

Material: solid oak or beech. Finish: for tinting or for enamel — depending on the color of the sofa.

Tapered and narrowing legs

A tapered leg is straight but narrows towards the bottom. The diameter at the base of the body is larger than at the floor. This is a visually light form: it creates a feeling that the sofa 'lifts off' from the surface, does not press down.

Tapered wooden legs for a sofa are especially appropriate in neoclassical, modern classic interiors, in spaces with high ceilings, where it is important to preserve the airiness of the space. Height — 8–15 cm. Cross-section at the base — at least 5–6 cm for a sofa with a load of 200+ kg.

Turned legs

Turned legs are produced on a lathe with profiling of the shape. This is a variable cross-section, decorative belts, rounding, diameter transitions. Not carving — precisely the shape. This is a classic type for furniture of a wide range: from moderate classics to expressive Empire style.

A turned wooden sofa support is already a decorative element. Even in the lower profile of the sofa, it is noticeable and defines its belonging to a specific style. It is precisely such legs that are most often chosen for classic sofas in living rooms in neoclassical and modern classic styles.

In the STAVROS catalog, turned legs are presented in several collections with different profiles — from restrained to rich. They can be combined withdecorative inlayson the facades of case furniture from the same series, creating a unified decorative interior system.

Carved wooden legs

Carved legs — ornamental relief on the surface, executed via CNC milling with manual finishing. Acanthus leaves, floral motifs, geometric patterns. This is the 'maximum decor' category — for representative classic furniture, for sofas in Baroque and Rococo styles, for study solutions.

Carved wooden legs for a sofa in Moscow — a solution for those building an interior holistically: sofa, armchairs, console, mirror, cornices — one ornamental language. In this context, a carved leg is not excess, but an organic part of the system.

The 'Prestige' processing level by STAVROS is manual sanding after CNC, perfect edges of the ornament, high detail.

Low supports for massive sofas

Low legs 5–8 cm high — for large sofas with wide cushions and a substantial body. They do not try to visually 'lighten' the massive item — on the contrary, they create a sense of stability and solidity.

Low wooden supports for a sofa are especially appropriate in interiors with low ceilings, where high legs would create a feeling of space overload. Also — for corner sofas with heavy construction, where the load on each support is higher.

High legs for a light contemporary look

High legs 12–20 cm — for sofas that need visual airiness. The item literally 'floats' above the floor. The space under the sofa becomes part of the room's rhythm. Cleaning is comfortable, ventilation is good.

Tall wooden sofa legs are popular in Scandinavian designs, in neoclassical settings with high ceilings, and in studio spaces. The shape is conical or straight, maximally laconic. The material is oak or beech with light toning or white enamel.

---

For which sofas are wooden legs suitable?

For a straight sofa

A straight sofa is the most common type. Four legs at the corners or six with an additional pair in the center (for long constructions). Wooden supports are suitable here in any style and height range.

When choosing legs for a straight sofa, the main parameters are: the total length of the sofa and the weight of the body with upholstery. A sofa 220+ cm long with six support points allows for more decorative legs with a smaller cross-section than a sofa on four points with the same load.

For a corner sofa

A corner sofa is a structurally complex item. The number of support points is greater, and the load is distributed unevenly: the corner block bears a greater load than the side sections. For corner sofas, the following are recommended:

• wooden legs of sufficient cross-section (5–7 cm and above);

• a uniform type of legs around the entire perimeter (different legs on one sofa is a mistake);

• height — equal at all support points, otherwise the sofa will become skewed.

Wooden sofa corner supports must have identical height with tolerance not exceeding 1 mm. Otherwise — visible misalignment and accelerated wear of mechanisms and upholstery.

For a sofa bed

Sofa bed — a special case. The unfolding mechanism creates additional dynamic load and shifts the center of gravity when unfolded. For sofa bed models:

• legs must not interfere with the mechanism's operation (the trajectory of moving elements must be considered);

• leg height affects unfolding convenience — excessively high legs can complicate the process;

• mounting must be reinforced, bolted, with a metal mounting plate;

• do not use tall carved decorative legs under sofa beds — function is more important than decoration.

Wooden legs for a sofa bed in Moscow — these are straight or tapered supports of moderate height (6–10 cm) with reliable bolted mounting.

For a compact sofa and bench

Small two-seater sofas, benches, ottomans — items with moderate load and high decorative requirements. Here the leg is fully visible, without being 'hidden' in the lower part of the body. Shape, proportion, and finish — everything matters.

For a bench, tall conical legs 15–20 cm with a slender silhouette work perfectly. For a small two-seater sofa in a classic style — turned or shaped legs 10–14 cm with a finish coordinated with the upholstery fabric.

For a classic sofa

A classic sofa features a shaped back, deep cushions, rich upholstery, and decorative trim along the edges. The legs here are a continuation of this language. Cabriole, turned supports with acanthus decor, carved legs with a profile — these are the right choices.

Wooden legs for a classic sofa in Moscow should be made of solid wood, with a finish coordinated in color with the wooden elements of the interior: parquet, console, mirror frames. STAVROS offers legs compatible in ornament withon the walls, creating a complete classical composition.andcornicesto create a cohesive decorative solution.

For upholstered furniture to replace old supports

This is a separate and very common scenario. Old legs have broken, become unusable, or simply grown tiresome — and the person wants to update the sofa by replacing the supports. This works: new wooden legs for the sofa as a replacement can radically change its appearance.

What you need to know when replacing:

• measure the diameter and thread pitch of the screw-in nut in the frame (M8 or M10 are the most common);

• measure the height of the old legs and decide whether to change it;

• Ensure that the mounting of the new legs matches the existing mounting points in the frame.

When ordering from STAVROS — specify these parameters to the manager, and they will select the exact option without frame modifications.

---

How to choose wooden sofa legs: 8 key criteria

By height: the first question that determines everything

The height of wooden sofa legs is a parameter that affects both ergonomics and aesthetics. Three variables simultaneously.

Leg height	Sofa type	Effect
5–7 cm	Massive corner, folding	Stability, monumentality
7–10 cm	Standard straight sofas	Balance of stability and lightness
10–15 cm	Sofas in neoclassical, classic styles	Airiness, space under furniture
15–20 cm	Scandinavian, compact sofas	Maximum lightness of appearance

Critical point: seat height. Standard is 42–48 cm from the floor (cushion + frame + leg). If you replace 8 cm legs with 15 cm legs — the seating rises by 7 cm. This is noticeable. Check in advance, especially if the sofa is used by elderly people or children.

By shape: silhouette visible from afar

Leg shape is the first thing discernible from 3–5 meters away. A sofa is perceived as an object precisely through its lower contour.

• Straight — neutral, concise, universal

• Cone — lightness, movement, neoclassicism

• Cabriole — classic curve, baroque, traditional upholstered furniture

• Turned — wide classic range

• Carved — rich classicism, decorative maximum

The shape of the leg and the shape of the sofa back should be 'in the same key'. Curved figured back + straight square legs — a stylistic break. Curved back + cabriole — a unified image.

By sofa style

Classic — turned, cabriole, carved. Neoclassical — cone, moderately turned. Modern interior — straight or cone minimalism. Scandinavian style — tall cone, light wood. Retro — figured with profile, moderate decorativeness.

By load: safety before decor

For a sofa, this is a critical block. An error here is not just aesthetic — it is structural.

Calculate the load. Sofa weight — 60–120 kg. Plus dynamic load during use — 150–300 kg. Total: the sofa carries 200–400 kg in different modes.

With four support points, each leg carries 50–100 kg. With six points — 35–65 kg. Cross-section of a solid oak wooden leg:

• 3–4 cm — for loads up to 50 kg (light chairs, benches)

• 5–6 cm — for loads of 50–100 kg (standard sofas)

• 7+ cm — for loads of 100+ kg (large corner sofas)

Solid oak has high bending and compression strength. With the correct cross-section and reliable fastening, wooden legs for a heavy sofa can withstand loads without deformation.

By sofa type: straight, corner, fold-out

Each type has its own requirements (see the previous section). Let's add an important nuance: for a fold-out sofa, check if the legs interfere with the mechanism's operation even before purchase. This means measuring the space the mechanism needs when unfolding.

By material: oak, beech, or blank for enamel

Oak — dense, with a pronounced coarse texture, dark or medium tone. For tinting and varnish finishing while preserving the grain. For interiors in brown, walnut, dark colors.

Beech — fine-textured, uniform. Takes any enamel paint evenly. Ideal for white, cream, gray, pastel sofas in neoclassical and Provençal styles.

At STAVROS — both options are properly kiln-dried to a moisture content of 8 ± 2%. This guarantees stability: the legs do not crack or deform with changes in room temperature and humidity.

By mounting type: don't buy blindly

This is the most 'technical' parameter — and the most frequently ignored one. It happens that a leg is purchased but doesn't fit the sofa frame's mounting type.

Main mounting types:

• M8 stud — a metal stud screws into an insert nut in the wooden frame. The most common type for sofas. Standard stud diameter is M8, length 25–35 mm

• M10 stud — reinforced version for heavy furniture

• Mounting plate — a metal plate is attached with four screws to the frame, with a nut for the stud in the center. For sofas with thin lower frame beams

• Bolt-through — bolt passes completely through the lower frame beam. Maximum reliability

When replacing legs: measure the diameter of the insert nut in the frame and the length of the existing stud. Mismatched thread diameter is the most common reason for product returns when buying online.

By combination with other furniture

Sofa legs don't exist in a vacuum. They are perceived in context: parquet, coffee table legs, wooden elements in the console, mirror frames. Unity of wooden elements in the interior is a sign of mature design.

Ideal option: sofa legs and armchair legs from the same STAVROS series. Coffee table legs from the same collection or a similar one. They don't have to be the same shape—it's about the same wood species, same finish, same ornamental language.

---

What sofa leg height is suitable for different purposes

Height is not just about centimeters, but also about what you want to achieve visually and in terms of feel from the sofa.

Low legs: stability and solidity

Legs 5–7 cm high give the sofa a 'grounded' look. Massive, stable, monumental. The space under the sofa is minimal—cleaning is difficult, but the appearance is calm. Suitable for large corner sofas, for interiors in dark tones, for minimalist modern spaces.

Medium legs: optimal balance

Height 8–12 cm is the 'golden zone' for most sofas. The sofa is slightly elevated, the space underneath is noticeable, vacuuming works freely. The form factor allows for both straight and turned shapes. This is the most versatile range.

High legs: airiness and lightness

Legs 13–20 cm turn the sofa into a 'floating' object. This is a modern type of perception: furniture doesn't stand on the floor, but hovers above it. Under the sofa is free: cleaning, ventilation, light from the window passes underneath.

Visually, high legs make the room feel more spacious. This is especially valuable in small living rooms where every meter of space counts. But it's important: high wooden sofa legs must have sufficient cross-section—a thin, tall support under a heavy sofa is unstable.

How height affects seating

Here is the actual calculation scheme:

• Sofa frame height: 25 cm

• Spring block and upholstery height: 15 cm

• Leg height: 10 cm

• Total seat height: 25 + 15 = 40 → from floor to cushion: 10 + 15 = 25 (the frame is not counted separately — it forms the lower part of the base)

Correct scheme: leg height + seat cushion height from the lower edge of the frame = final seating height. Standard is 42–48 cm. Lower — uncomfortable for adults, higher — uncomfortable for children and the elderly.

---

Which materials are better for wooden sofa legs

Why wood is the right choice for upholstered furniture

A sofa is an item that combines soft textiles, a wooden frame, and decorative elements. A wooden leg is an organic continuation of this item: it is made of the same material as the frame. This is not a collage of different materials — it is a single object.

Wood is warm. Tactilely and visually. Next to fabric or leather upholstery, a wooden leg creates a feeling of comfort and quality that a metal support will never provide.

Wood is repairable. If a leg gets scratched or dented—it can be sanded and repainted along with the sofa during its restoration. Metal—cannot.

Oak: a wood species for those who value reliability

Oak is a hard deciduous wood species with high bending and compression strength. Density—about 700 kg/m³. Large, expressive grain. Color—from light yellow to warm brown, depending on the stain.

Wooden sofa legs made of oak—for interiors with a pronounced wooden component: dark parquet, wooden panels, dark framed furniture. For staining, for oil, for semi-matte varnish with grain preservation.

Beech: a wood species for a clean finish

Beech is a fine-grained, homogeneous wood species. Density—about 680 kg/m³, strength comparable to oak. The main difference: a homogeneous structure without a large pattern. This means that under enamel paint, beech provides a perfectly smooth surface.

Wooden legs made of beech—for white, gray, cream sofas. For Provencal style, neoclassical with white decor, Scandinavian interiors. Beech under enamel—is a pure color without a translucent grain.

Two levels of processing: Standard and Prestige

STAVROS offers legs in two categories of surface treatment quality.

Standard — machine sanding. A good, even surface for primer and finish coating. For production tasks, for furniture with subsequent dense painting.

Prestige — machine sanding plus manual finishing. Perfect edges, clear profile transitions, flawless surface for clear varnish, tinting, or thin enamel. For final decorative solutions, for visible elements of representative furniture.

---

How to choose wooden legs to match the sofa style

For a classic sofa

A classic sofa features a deep back, voluminous cushions, rich upholstery (velvet, jacquard, genuine leather). Here, the legs are part of the stylistic statement.

The right choice: turned wooden legs with profiling, cabriole, carved supports with acanthus decor. Made of solid oak for warm brown tinting or beech for pearl enamel.

Principle: the depth of leg decor is coordinated with the upholstery decor. Rich jacquard with a large pattern — the leg can be moderate. Solid-color velvet — the leg can be more decorative.

For neoclassical style

Neoclassicism is restrained classicism: clean lines, moderate decor, high-quality materials without overloading with ornament. Conical turned legs with a thin profile, height 12–16 cm. A slender silhouette. A laconic transition from the body to the floor.

Wooden legs for a sofa in the neoclassical style — beech under cream or gray enamel, or oak under light tinting to match herringbone horizontal parquet.

For a modern sofa

A modern sofa often has a strict rectangular silhouette, minimalist upholstery, and no decor. Here, the leg should be the same: straight or slightly conical, a clear silhouette, minimal ornament.

Wooden sofa legs in a modern style — made of oak with an oil finish and natural color, or beech with a matte enamel finish. Moderate height — 8–12 cm.

For Scandinavian interior

Scandinavian style — light wood, white walls, natural textiles. Sofa legs: tall tapered (12–18 cm), made of beech with white or natural finish, or oak with a bleaching tint.

Height + taper + light wood = sofa 'floats' in a Scandinavian space. This is a recognizable formula that works flawlessly.

For decorative upholstered furniture

A decorative sofa is an item created for visual effect. A bench at the head of a bed, a throne chair in a study, a sofa in a boudoir style. Here, decorative wooden sofa legs can be as rich as possible: carved, shaped, with gilding or an antique patina.

STAVROS produces legs that can be finished with gold leaf or patina — this is the level of exclusive decorative projects.

---

Common mistakes when choosing sofa legs

A professional perspective on the topic is impossible without analyzing mistakes. And they are made regularly when buying wooden sofa legs — by both private buyers and manufacturers.

Choosing only by photo, without taking measurements

This is the first and main mistake. A leg in a photo may look proportional — but in reality, it may turn out to be too thin, too tall, or incompatible with your sofa's mounting system.

What to do before ordering: measure the height of the current legs, the diameter of the screw nut in the frame, and the width of the lower frame beams. This takes five minutes and eliminates the need to return the product.

Too decorative legs for a utilitarian sofa

A carved cabriole leg under a sofa with simple fabric upholstery and a straight silhouette is a contrast that works in favor of neither the leg nor the sofa. The decoration of the leg should be proportional to the decorativeness of the entire piece.

Rule: the level of ornamentation of the leg ≤ the level of ornamentation of the sofa.

Weak legs under a heavy sofa

Decorative legs with a cross-section of 3 cm under a corner sofa weighing 100 kg plus a load of 200 kg is a structural error. Thin wood under high load deforms, cracks, and breaks. The sofa starts to 'slide' on the floor.

Choose a cross-section with a 30–40% margin. If the calculated load is 80 kg — take a leg rated for 110–120 kg.

Legs of different heights when replacing

A sofa stands on four to six supports. If at least one leg differs in height by 2–3 mm — the sofa will stand unevenly. This accelerates wear on the frame, the unfolding mechanism, and the upholstery. When replacing old legs, buy all new ones at the same time, from the same batch.

Ignoring the unfolding mechanism

Tall decorative legs under a sofa bed - and when unfolding, the mechanism rests against the legs, the frame warps, and the upholstery tears. Before buying legs for a sofa bed - unfold the mechanism and measure the space it needs.

Lack of consideration for the overall decorative system

Legs purchased separately from the interior solution. Result - the wooden supports of the sofa do not match the legs of the coffee table in color and shape, nor the wooden elements of the console, nor the mirror frames. This is a detail that everyone notices.

Solution: buy all wooden decorative interior elements in one place, from the same collections. STAVROS provides a full range - legs,Moldings, Crown Molding, appliqueandCapitals- from a single series, from a single solid wood, with a single finish.

---

Where to buy wooden sofa legs in Moscow

STAVROS catalog: full selection by parameters

Buy wooden sofa legs in Moscowcan be found in the STAVROS catalog - over 130 models made of solid oak and beech. Filtering by shape, height, collection, availability. The full range of wooden supports for upholstered and case furniture in one place.

What is especially important for sofa buyers: the catalog displays decorative elements from the same series alongside the legs - you can immediately select a unified decorative system for the entire space.

What to clarify before placing an order

Before purchasing wooden sofa legs online — clarify the following:

1. Type of attachment in your sofa frame (M8 or M10 stud, mounting plate, bolt-on)

2. Thread diameter of the insert nut

3. Required height (with calculation of final seating height)

4. Sofa type (straight, corner, fold-out) and number of legs

5. Upholstery style and color — for selecting wood species and finish

STAVROS manager will help select wooden sofa supports exactly to your request. Free phone: 8-800-555-46-75.

Pickup and delivery in Moscow

STAVROS warehouse in Moscow — self-pickup if items are in stock. Order conditions, payment and delivery methods — on the page"Payment and Delivery". Delivery across Russia by transport companies. Orders from one item.

Showroom: See in person

The STAVROS Moscow showroom (Volokolamskoe Highway, 3) is a place where you can hold a sofa leg in your hands, feel the quality of the finish, compare 'Standard' and 'Prestige', place a support against a sofa sample, and get live consultation on selection.

Working hours and directions — on the pageContacts.

---

Who wooden sofa legs are especially suitable for

For private buyers

A sofa on new wooden legs is an update without buying new furniture. If the upholstery is still good, the frame is sturdy, but the look is outdated — replacing the legs changes the sofa. Literally. Height, shape, color — and it's already a different piece in a different interior.

This is one of the most affordable ways to make upholstered furniture current without the cost of a full replacement. Wooden sofa legs for replacement are a real, working tool.

For interior designers

For a design project where furniture must form a unified system, STAVROS is a catalog where legs for sofas, armchairs, consoles, and coffee tables are taken from the same collections. The result: an interior where the wooden details 'speak' to each other.

For furniture workshops and manufacturers

Wooden legs made from solid natural wood are a professional component of upholstered furniture production. Stable availability in the Moscow warehouse, wide assortment, possibility of wholesale orders. A sofa on solid wood turned legs is a different price segment, a different market positioning.

For restorers

A lost or broken sofa leg must be reproduced precisely: the same shape, the same wood species, the same behavior under finish. Only solid natural wood ensures compatibility with the original wood of an antique piece. The STAVROS catalog includes historical leg forms for restoration projects.

Custom upholstered furniture manufacturers

A carved or turned wooden leg is a competitive advantage. A customer choosing a sofa with solid oak legs pays for quality consciously. This is an argument in favor of a higher price segment and stronger positioning.

---

FAQ: answers to frequently asked questions

What wooden sofa legs are the most popular in Moscow?

The most in demand are conical turned legs 8–12 cm high for straight sofas in the neoclassical style, low figured supports 5–8 cm for corner and heavy sofas, as well as cabriole carved legs for classic upholstered furniture.

How to choose the height of sofa legs?

The final seat height — leg height plus seat cushion height from the lower edge of the frame — should be 42–48 cm. Measure the current seat height of your sofa and calculate what leg height needs to be added or removed to achieve the desired result.

What legs are suitable for a sofa bed?

Straight or conical wooden legs of moderate height 6–10 cm with bolt fastening or mounting plate. Check that the legs do not interfere with the unfolding mechanism's trajectory. Carved and tall decorative legs are not recommended for sofa beds.

Are wooden legs suitable for a heavy sofa?

Yes, with the correct cross-section. Solid oak with a diameter of 6–8 cm can withstand loads of 100–180 kg per support. For a heavy corner sofa — choose legs with a cross-section of at least 6 cm and reinforced bolt fastening.

What is better to choose: low or high sofa legs?

It depends on the task. Low (5–7 cm) — for massive sofas, for interiors with low ceilings, for a stable monumental look. High (13–20 cm) — for lightness, airiness, ease of cleaning, for Scandinavian and modern style.

Which wooden legs are suitable for a classic sofa?

Turned with a profile, cabriole, carved with acanthus decor. Made of solid oak for tinting or beech for mother-of-pearl enamel. The level of leg decoration — coordinated with the richness of the sofa upholstery.

Can old sofa legs be replaced with new wooden ones?

Yes. Measure the diameter of the threaded nut in the frame (M8 or M10), the length of the stud, the height of the current legs. When ordering from a STAVROS manager — name these parameters for precise selection without modifying the frame.

How to understand if the mounting will fit?

Determine the type of fastening in your sofa. Most modern sofas use a threaded nut M8 or M10. STAVROS wooden legs are supplied with studs of several standard diameters — specify when ordering, and the manager will select the required option.

Where to buy wooden sofa legs in Moscow?

At STAVROS — a manufacturer of wooden furniture decor. Catalog on the website with availability at the Moscow warehouse, showroom at the address: Volokolamskoye shosse, 3. Free phone: 8-800-555-46-75. Order from one item. Delivery in Moscow and Russia.

How not to make a mistake when choosing legs for upholstered furniture?

Measure parameters before ordering. Calculate the load. Determine the mounting type. Choose the height considering the final seating position. Ensure the leg style matches the sofa style. Select from the same series as other wooden interior elements.

---

About the company STAVROS

Wooden sofa legs in Moscow— it's about choosing a material that outlives trends. About details that make an object an object. About a base that carries not only weight but also an image.

STAVROS — a Russian manufacturer of wooden furniture decor made from solid oak and beech. Legs for upholstered furniture and sofas,appliqueandOutlets, MoldingsandCrown Molding, CapitalsandBrackets— a complete decor system for your furniture and interior.

Over 130 leg models and 4000 decorative items in the catalog. Chamber drying of wood, two quality levels — Standard and Prestige. Blanks for enamel and tinting. Orders from a single item. Warehouse and showroom in Moscow: Volokolamskoye Highway, 3. Phone: 8-800-555-46-75 (free within Russia).

STAVROS — when every detail matters.