NPU-307 Molded Decoration

NPU-307 Molded Decoration is a decorative element combining smooth lines and expressive forms, capable of adding special elegance to a room or facade. Its exterior appearance resembles a stylized plant composition, where an elegant swirl smoothly transitions into an opening floral element. Such a design allows using the applique in various stylistic solutions: from classic to modern eclectic. Below is a detailed description of the features of NPU-307, its advantages, application options, and installation recommendations.

1. Appearance and artistic value

1.1. General design features

1. Structure
   NPU-307 Molded Decoration has a vertical orientation, where the upper part resembles a rounded swirl, and the lower part — an opening flower or bowl from which a smooth leaf 'grows'. A small ball at the very bottom completes the composition, emphasizing its harmony.

2. Elegant curves
   Smooth lines and refined transitions give the decoration dynamism while simultaneously conveying a sense of monumentality. This contrast — between lightness and sturdiness — makes the item an attractive accent in interior and facade design.

3. Compatibility with other elements
   Thanks to its concise yet expressive design, NPU-307 Molded Decoration easily combines with other polyurethane decorative elements — cornices, moldings, pilasters, and rosettes.

2. Material: polyurethane and its advantages

— is a modern and practical choice for decorating interiors and facades. It possesses a range of advantages:

Polyurethane moldings This is a modern and practical choice for decorating interiors and facades. It has a whole range of advantages:

1. Light weight
   Polyurethane items weigh significantly less than gypsum or wooden counterparts, facilitating transportation and installation.

2. Strength and durability
   The material does not crumble, crack, or degrade under mechanical stress. When properly installed, the decoration retains its original appearance for many years.

3. Moisture resistance
   Polyurethane does not absorb water and does not rot, making it ideal for bathrooms, kitchens, and other high-humidity areas, as well as for outdoor applications — Facade decoration made of polyurethane.

4. Resistance to temperature fluctuations
   The material does not deform under sharp climate fluctuations, therefore polyurethane facade molding it is suitable even for regions with harsh weather conditions.

5. Ecological Safety
   High-quality polyurethane does not emit toxic substances, has no strong odor, and is safe for use in residential spaces, including children's rooms.

6. Ease of Painting
   Polyurethane items are usually white, which can easily be painted with acrylic, latex, or water-emulsion paints (for interior use) and facade paints (for exterior work).

3. Application Areas of NPU-307 Molding

3.1. Interior Use

1. Wall Decoration
   Wall Decoration with Polyurethane Using NPU-307 allows you to create expressive accents in the living room, bedroom, hallway, or dining room. Its vertical composition looks great on a free wall section or above a fireplace.

2. Door Decoration
   If interior doors appear too plain, you can attach NPU-307 to the top or center of the door panel, giving the door an elegant look. The item pairs well with classical and neoclassical hardware.

3. Furniture Decoration
   Cabinets, buffets, and chests can appear more aristocratic if NPU-307 is attached to their fronts. molded decoration element NPU-307. This approach is especially relevant when creating vintage or palace-style interiors.

4. Fireplace Surrounds
   In classic living rooms, the fireplace is a key interior element. Placing NPU-307 decoration in the fireplace surround area (e.g., above the firebox) can enhance the atmosphere of coziness and elegance.

5. Arches and Niches
   If the room has arched openings or deep niches, NPU-307 decoration will emphasize their shape and visually 'stretch' the space vertically.

3.2. Exterior Use

1. Polyurethane Facade Decoration
   polyurethane facade molding Used for decorating exterior walls, entrance areas, and balconies. NPU-307, due to its moisture resistance and resistance to temperature fluctuations, is ideal for such tasks.

2. Window and Door Decoration
   Placing decoration above a window opening or entrance door can give the facade a more expressive look. The elegant forms of NPU-307 will highlight the architectural features of the building.

3. Columns and Pilasters
   If columns or pilasters are present on the facade, NPU-307 can be attached to their front or between columns, forming an eye-catching composition of multiple elements.

4. Gables and Eaves
   A vertical applique will complete the gable or look interesting next to eaves, complementing the overall exterior style.

4. Installation of polyurethane molding NPU-307

4.1. Surface Preparation

1. Cleaning
   Walls, door panels, or facades should be cleared of dust, dirt, and peeling paint or plaster layers.
2. Spackling and priming
   If there are cracks or chips, they should be spackled. For better adhesive bonding, a primer can be applied to the surface.

4.2. Marking

1. Determining the center
   When the decoration is symmetrically placed (e.g., above a door), it is useful to mark the center of the door or wall.
2. Using a level
   To ensure the decoration is properly aligned, use a level or laser measuring tape.

4.3. Adhesive and fasteners

1. Adhesive Selection
   For installation of polyurethane molding Usually, universal mounting compounds or special polyurethane adhesives are used. It is important to consider conditions (humidity, temperature, interior or exterior finish).
2. Applying adhesive
   Adhesive is applied in a thin layer to the back side of NPU-307, paying special attention to edges and textured areas.

4.4. Installation of decoration

1. Pressing
   Carefully align the decoration with the marking and press it against the surface for several seconds to allow the adhesive to set.
2. Additional fixation
   For large items or vertical surfaces, the decoration can be secured with painter’s tape or supports until the adhesive is fully dry.

4.5. Filling joints and painting

1. Sealing
   If gaps exist, fill them with acrylic sealant or spackle, then lightly sand them.
2. Painting
   Polyurethane wall molding Easily painted with acrylic or water-emulsion paints (for interiors). For exterior applications, weather-resistant facade compounds are used.

5. Care of decoration

1. Dry cleaning
   In the room, it is sufficient to periodically wipe the decoration with a soft cloth or brush to remove dust. Polyurethane does not accumulate static electricity, so dust does not accumulate in large quantities.

2. Wet cleaning
   If stains appear, you can slightly moisten the fabric or sponge and gently wipe the surface. Avoid using aggressive cleaning agents with abrasive particles to prevent damaging the paint layer.

3. On the facade, the decor may become dirty with dust, rain, and wind marks. It can be easily washed with water from a hose or with a soft brush and cleaning agent. Due to its water resistance, polyurethane does not fear getting wet.
   On the facade, decoration may get dirty with dust and precipitation. It is easily cleaned with a soft brush or a stream of water from a hose. Polyurethane is not afraid of moisture, so such care is safe.

4. Repainting
   Over time, the color may fade or no longer match the new design. Decor made of polyurethane can be repainted without problems: simply clean the surface and lightly sand it if necessary, then apply new paint.

6. Combination with Other Elements

1. Moldings and cornices
   Horizontal lines of moldings or cornices complement the vertical form of NPU-307 well, creating a frame or border effect on the wall.

2. Columns and Pilasters
   Relief Decor in Interior and on the facade, it is often used in combination with columns and pilasters, where NPU-307 can serve as a central element on their front part.

3. Recesses and corner details
   To create a cohesive composition on the ceiling or walls, you can enhance the decor with recesses for chandeliers, corner overlays, and other elements. polyurethane decorative elements.

4. Fireplace Surrounds
   If you want to enrich the fireplace area, NPU-307 can be placed on the sides or upper part of the portal, especially in combination with a cornice or other overlays.

7. Where to buy NPU-307 decorative molding

Purchase Polyurethane facade decoration for the house or for indoor use in a polyurethane molding store. There you will find a wide selection of models, receive installation consultation, and also be able to select necessary accompanying products: adhesive, sealant, paint.

8. Advantages of NPU-307

1. Refined design
   Smooth scrolls and 'opening' flower motifs give the decor an aristocratic look and make it universally suitable for different styles.

2. Durability and Moisture Resistance
   Polyurethane ensures durability, resistance to precipitation and temperature fluctuations, allowing the product to be used not only indoors but also on facades.

3. Easy to install
   installation of polyurethane molding Does not require complex tools and skills: just universal adhesive and care.

4. Easy to paint
   The item can be painted in any desired color, selecting the shade to match the overall interior or exterior design.

5. Wide range of combination possibilities
   polyurethane facade molding and interior solutions easily combine with NPU-307, forming cohesive compositions with other decorative elements.

9. Ideas for using NPU-307

1. Wall accent
   Place the decor at the top of the wall, complementing it with moldings or narrow baseboards. This will create an expressive panel that attracts attention.

2. Door portal decoration
   Give the door an elegant look by installing NPU-307 above the opening. If you add pilasters or columns on the sides, you will get a grand entrance reminiscent of palace interiors.

3. Mirror decoration
   Attach the decor to the top of the mirror frame to give it an original and aristocratic look. For additional effect, you can paint the overlay gold or silver.

4. Facade inserts
   If the house facade appears dull, add a few NPU-307 elements between windows or under the eaves. Polyurethane facade decoration for the house It will give the building individuality and highlight the architectural concept.

5. Fireplace Area
   Install decor above the fireplace, connecting it to the eaves or other moldings. Such a composition will make the fireplace the focal point of the living room.

10. Conclusion: Why Choose NPU-307 Molded Decor

NPU-307 molded decor is a perfect blend of smooth lines, expressive forms, and polyurethane functionality. Its refined design will complement both classic and modern interiors and serve as an elegant accent on the facade. Easy installation and material durability make this element the optimal choice for those who value beauty and longevity.

If you want to transform a space, emphasize architectural features, or create a unique atmosphere of comfort and luxury, NPU-307 Molded Decoration will be a reliable ally. Purchase it at a polyurethane molding store and bring your design ideas to life — whether updating interiors or decorating facades.